Regenerative Tube Receiver
 

Hi everybody,
I would like to build a regenerative shortwave tube receiver using the
1U4 and 3A5 battery tubes. I know this is a very vague description of
the project. At one point I had a schematic that was sent to me by an
OM in VE land but I misplaced (lost) it. If anybody has something
along this line please let me know.
Thanks
73
Fred
wb6iiq

Fred wrote:
Hi everybody,
I would like to build a regenerative shortwave tube receiver using the
1U4 and 3A5 battery tubes. I know this is a very vague description of
the project. At one point I had a schematic that was sent to me by an
OM in VE land but I misplaced (lost) it. If anybody has something
along this line please let me know.
Thanks
73
Fred
wb6iiq

If you buy the RCA Receiving tube manual (RC-19, I think it's the 1959
version) from Antique Electronic Supply it has a schematic for one using
two 1U4's and a 3V4. You need the book anyway...

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com

Fred wrote:
Hi everybody,
I would like to build a regenerative shortwave tube receiver using the
1U4 and 3A5 battery tubes. I know this is a very vague description of
the project. At one point I had a schematic that was sent to me by an
OM in VE land but I misplaced (lost) it. If anybody has something
along this line please let me know.
Thanks
73
Fred
wb6iiq

If you buy the RCA Receiving tube manual (RC-19, I think it's the 1959
version) from Antique Electronic Supply it has a schematic for one using
two 1U4's and a 3V4. You need the book anyway...

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com

Fred wrote:
Hi everybody,
I would like to build a regenerative shortwave tube receiver using the
1U4 and 3A5 battery tubes. I know this is a very vague description of
the project. At one point I had a schematic that was sent to me by an
OM in VE land but I misplaced (lost) it. If anybody has something
along this line please let me know.
Thanks
73
Fred
wb6iiq

If you go to Antique Electronic Supply you will find some books by
Lindsay on this. Lindsay also has his own web site. Their are some
kits on the Anitque site too.

Bill N5NOB

Fred wrote:
Hi everybody,
I would like to build a regenerative shortwave tube receiver using the
1U4 and 3A5 battery tubes. I know this is a very vague description of
the project. At one point I had a schematic that was sent to me by an
OM in VE land but I misplaced (lost) it. If anybody has something
along this line please let me know.
Thanks
73
Fred
wb6iiq

If you go to Antique Electronic Supply you will find some books by
Lindsay on this. Lindsay also has his own web site. Their are some
kits on the Anitque site too.

Bill N5NOB

On 29 May 2004 12:24:07 -0700, Fred wrote:

Hi everybody,
I would like to build a regenerative shortwave tube receiver using the
1U4 and 3A5 battery tubes. I know this is a very vague description of
the project. At one point I had a schematic that was sent to me by an
OM in VE land but I misplaced (lost) it. If anybody has something
along this line please let me know.
Thanks
73
Fred
wb6iiq

Fred,,I sent the article to you but wasn't watching what I was doing.
Too early in the morning.
You got 3 copies of the 2 page article in different sizes.
Sorry about that,It's a rather large attachment now.
Hope you can use it..73 de VE3JUA.

On 29 May 2004 12:24:07 -0700, Fred wrote:

Hi everybody,
I would like to build a regenerative shortwave tube receiver using the
1U4 and 3A5 battery tubes. I know this is a very vague description of
the project. At one point I had a schematic that was sent to me by an
OM in VE land but I misplaced (lost) it. If anybody has something
along this line please let me know.
Thanks
73
Fred
wb6iiq

Fred,,I sent the article to you but wasn't watching what I was doing.
Too early in the morning.
You got 3 copies of the 2 page article in different sizes.
Sorry about that,It's a rather large attachment now.
Hope you can use it..73 de VE3JUA.

On 29 May 2004 12:24:07 -0700, Fred wrote:

Hi everybody,
I would like to build a regenerative shortwave tube receiver using the
1U4 and 3A5 battery tubes. I know this is a very vague description of
the project. At one point I had a schematic that was sent to me by an
OM in VE land but I misplaced (lost) it. If anybody has something
along this line please let me know.
Thanks
73
Fred
wb6iiq

Fred I need your real E-mail address..VE3JUA.

On 29 May 2004 12:24:07 -0700, Fred wrote:

Hi everybody,
I would like to build a regenerative shortwave tube receiver using the
1U4 and 3A5 battery tubes. I know this is a very vague description of
the project. At one point I had a schematic that was sent to me by an
OM in VE land but I misplaced (lost) it. If anybody has something
along this line please let me know.
Thanks
73
Fred
wb6iiq

Fred I need your real E-mail address..VE3JUA.