| Home |
| Search |
| Today's Posts |
|
#2
July 14th 04, 12:48 AM
|
|||
|
|||
What's the quickest and simplest way of running an 8 ohm earpiece to a 32 ohm earpiece output socket without suffering too much power loss? ====== Any small transformer with a winding ratio 2 : 1 . Check with low voltage -50 Hz , 1 V in ......0.5 V out. Ratio is not all that critical . You can also use a tranformer's single winding with a centre tap . Frank GM0CSZ / KN6WH |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Tx Source Impedance & Load Reflections | Antenna | |||
| FS: PSC-10 Hammarlund Speaker for HQ-129X | Boatanchors | |||
| A Subtle Detail of Reflection Coefficients (but important to know) | Antenna | |||
| Reflection Coefficient Smoke Clears a Bit | Antenna | |||
| 50 Ohms "Real Resistive" impedance a Misnomer? | Antenna | |||
Threaded Mode
