| Home |
| Search |
| Today's Posts |
|
#12
October 16th 04, 10:26 PM
|
|||
|
|||
Mike Andrews wrote:
[...] You might find Terry Ritter's work on getting a good noise source to be of at least a bit (ahem!) of interest: http://www.ciphersbyritter.com/NEWS5/FMRNG.HTM There are lots of other hits in Google for a search on 'calibrated "pseudo random" noise' (without the outer single quotes). It's hard to generate good noise, and at least as hard to find it. -- Mike Andrews Tired old sysadmin Also take a look at Terry's analysis of various other noise sources: http://www.ciphersbyritter.com/NOISE/NOISRC.HTM Good noise is hard to find  Mike Monett |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Need a low noise VXO for narrow sweep | Homebrew | |||
| WTB: HP/Agilent 346A (or B) Noise Source for HP 8970A Noise Figure Meter | Homebrew | |||
| signal to noise ratio drops on connecting the antenna | Homebrew | |||
| Automatic RF noise cancellation and audio noise measurement | Homebrew | |||
Threaded Mode
