Custom made 19" rack cabinets
 

Can anyone recommend a good source for 19" EIA rack mounted aluminum
enclosure for electronic project? Also, this company should be able to
handle small quantity order, and pre-punch square and round openings on
the front and rear sides, and silk screen the lettering.

Has anyone else put their creations in a professional enclosure and had
the openings made by others? Thanks in advance.

On 22 Mar 2005 00:53:08 -0800, "
wrote:

Can anyone recommend a good source for 19" EIA rack mounted aluminum
enclosure for electronic project? Also, this company should be able to
handle small quantity order, and pre-punch square and round openings on
the front and rear sides, and silk screen the lettering.

Has anyone else put their creations in a professional enclosure and had
the openings made by others? Thanks in advance.

Considering the cost of shipping, someplace local to you would make
the most sense.

Check out the Thomas Register at a local library, or their online
version.

Happy trails,
Gary (net.yogi.bear)
--
At the 51st percentile of ursine intelligence

Gary D. Schwartz, Needham, MA, USA
Please reply to: garyDOTschwartzATpoboxDOTcom

wrote in message
ups.com...
Can anyone recommend a good source for 19" EIA rack mounted aluminum
enclosure for electronic project? Also, this company should be able to
handle small quantity order, and pre-punch square and round openings on
the front and rear sides, and silk screen the lettering.

Has anyone else put their creations in a professional enclosure and had
the openings made by others? Thanks in advance.


Jim Garland, W8ZR used Buckeye Shapeform in the Miami, Ohio area for his
last project (silk screening and printing)
http://www.miami.muohio.edu/presiden...ller/index.htm.

LMB Enclosures (California) does custom work - but I do not know what their
minimum order is.

There was an enclosure firm in the Ithaca, NY area that did this type of
work.

gb