Home |
Search |
Today's Posts |
#12
![]() |
|||
|
|||
![]()
On Tue, 13 Sep 2005 20:33:11 -0700, "Jim"
wrote: Most power MosFets have a large Gate to Source capacitance which makes it difficult to use them at radio frequencies. It can be done, but the higher the desired operating frequency the greater effect the parasitic capacitance has, so most designs I have seen were up to 7 MHz and that was about the upper limit. Jim Pennell N6BIU 7mhz was not the upper limit but around 20m the Gate Xc does makes them harder to drive. There are a number of designs that run them as linear amps to 10m but the drive networks take that into account. A pair of IRF510s will do 35-40W in the FARA design published in QST. Allison |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Wanted: Power Supply for TR-4C | Boatanchors | |||
Wanted: Power Supply for TR-4C | Homebrew | |||
Current in loading coil, EZNEC - helix | Antenna | |||
Next Stop ... MARTIAL LAW | Shortwave | |||
NTIA Claims BPL Could Help Alleviate Power Line Noise | Shortwave |