Home |
Search |
Today's Posts |
#5
![]() |
|||
|
|||
![]()
Hi Scott,
Yeah it has been checked and it was found to be correct. The TS-780 also has a Send/Rec Switch on the front panel and when it is flicked in Send Mode, it goes in transmit mode ( no reception is possible) however ON AIR LED does not switch on, T/R relay not activated and no RF power output. Furthermore, i believe that when TX offset is activated, the display frequency should change ( depedning on the offset frequency) on transmit. However this does not change. It seems that in transmit mode, the transmitter is not being activated at all.....that is why i presume its a control failure rather than RF or final stage failure. I am currently following the logic control circuit to switch between transmit/receive mode. Thanks for your help though. If anybody has more suggestions, please let me know. Thanks all Mario |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
StereoZoom microscope repair | Homebrew | |||
Former VOA Bethany site in urgent need of repair | Broadcasting | |||
ICOM LMR repair parts FS | Swap | |||
Did you see Alex Jones on TRIO??? | Shortwave | |||
Purc Micor repair | Swap |