need bandswitch
 

Hi everyone,

I am in need of a complete multi wafer bandswitch 5/6 lugs for a set of
3-500Z.

Currently, the one installed is a single wafer, trying to hookup

a tuned input board. The amp i am working on is Hunter Bandit 2000C

which is 10-80 meters. Any suggestions, or have one laying around in your
parts bin you can let go?

Thanks for looking.

73

Chris NI4L

need bandswitch
 

Chris Fox NI4L wrote:
Hi everyone,

I am in need of a complete multi wafer bandswitch 5/6 lugs for a set of
3-500Z.

Currently, the one installed is a single wafer, trying to hookup

a tuned input board. The amp i am working on is Hunter Bandit 2000C

which is 10-80 meters. Any suggestions, or have one laying around in your
parts bin you can let go?

Thanks for looking.

73

Chris NI4L


You can try to home brew your own by attaching a shaft to the
back of the main band switch to gang to a second one.
If in your case, you want to add a tuned input switch this
is the best bet as the two switches should be of different
sizes (one high power one low). You might need to use
flexible shafting for the coupling, and gearing if the
two switches have different switching angles.