[AMSAT-UK] Lunar Ham Radio Payload Launched
 

AMSAT-UK

///////////////////////////////////////////
Lunar Ham Radio Payload Launched

Posted: 23 Oct 2014 12:38 PM PDT
http://amsat-uk.org/2014/10/23/lunar...load-launched/

4M Chang Zheng CZ-3C-G2 launch vehicle

The 4M amateur radio payload with a WSJT JT65B 145.980 MHz beacon was
launched on Thursday, October 23 at 1759 UT.

The Chang’e-5-T1 mission 4M payload launched on the Chang Zheng CZ-3C/G2
rocket from the LC2 launch complex at the Xichang Satellite Launch Center,
Sichuan. The first telemetry from the JT65B beacon was received at 1918 UT
byÂ*Roland Zurmely PY4ZBZ in Brazil.

A number of Australian radio amateurs have reported receiving the signals
from 4M. Among them was Rob Whitmore VK3MQ at Mount Dandenong, Victoria
(QF22qe) who reports that at best, the strength was -13 on the JT65B scale
and could also be totally down into the noise with no decodes.
4M reception by Berend PA3ARK signal level -8 dB

Rob VK3MQÂ*says I am using the Before TLE as published on the Luxspace
website with Gpredict to stear my 6 element yagi and TS2000. With Doppler
the frequency is 145.9787 MHz at the time of writing. So far the decodes
have included callsign, telemetry and a story of Manfred Fuchs threading
through alternate decodes.

Sam Jewell G4DDK @DXING Tweeted Had around 40 minutes of near 100% copy
from the moon probe 4M transmitter from around 1725z [Oct 24]. 9 element
Yagi and K3/2m on 2m /JT65B

The spacecraft will head into a Lunar Transfer Orbit (LTO), before
performing a flyby around the Moon. Radio amateurs are encouraged to
receive and report the signals. http://moon.luxspace.lu/receiving-4m/

For tracking information just enter your latitude and longitude at
http://moon.luxspace.lu/tracking/

See the 4M payload Blog at http://moon.luxspace.lu/blog/

4M Lunar Payload
http://amsat-uk.org/2014/10/15/4m-lu...keps-released/

AMSAT-UK

Facebook https://www.facebook.com/amsatuk

Twitter https://twitter.com/AMSAT_UK