Schematic needed, Yaesu G-1000DXA rotor and controller
 

Blown fuse and hot transformer smell ---

Anyone have a schematic, or point me toward one on line?

Email me k0hb-at-ultradx-dot-com

Thanks.

73, de Hans, K0HB
--
"Just a boy and his Radio"
Sea stories here --- http://k0hb.spaces.live.com/
Request QSL at --- http://www.clublog.org/logsearch/K0HB
All valid QSL requests honored with old fashioned paper QSL!
LoTW participant

Schematic needed, Yaesu G-1000DXA rotor and controller
 

"KØHB" wrote in message
...
Blown fuse and hot transformer smell ---

Anyone have a schematic, or point me toward one on line?

Email me k0hb-at-ultradx-dot-com


I've found a schematic and found that the power transformer puked and die
d,
so I've ordered a new transformer from Yaesu.

The old transformer, model KT-28-A is an "open frame" style with numbered

solder terminals.

Current production transformers, model KT-28-E-3, don't have numbered sol
der
terminals, but rather colored wire outputs (unfortunately not labeled).

Does someone have a recent G-1000DXA (or G-800DXA) who wouldn't mind lift
ing
the cover to tell me the wire colors of:

1) 110V primary
2) 28V secondary to the PS board (bottom board)
3) 16V secondary to the CNTL-Unit board (top board)

Thanks!

73, de Hans, K0HB
--
"Just a boy and his Radio"
Sea stories here --- http://k0hb.spaces.live.com/
Request QSL at --- http://www.clublog.org/logsearch/K0HB
All valid QSL requests honored with old fashioned paper QSL!
LoTW participant
--