Reset on Pro-93 Scanner?
 

Greetings All!
I have a friend that has a Pro-93 scanner that is not acting
correctly. He has no manual for it and I am wondering if there is a
reset for this radio. Thanks in advance for any help! Jon in Upstate
South Carolina.

Reset on Pro-93 Scanner?
 

"jon" wrote in message oups.com...
Greetings All!
I have a friend that has a Pro-93 scanner that is not acting
correctly. He has no manual for it and I am wondering if there is a
reset for this radio. Thanks in advance for any help! Jon in Upstate
South Carolina.


On-line owner's manual at:
http://support.radioshack.com/suppor...oc66/66173.pdf

According to it there is a reset opening on side. Turn off the scanner,
then turn it on. Insert the obligatory straightened paper clip and
press the reset button therein.

Regards,
Johhn

Reset on Pro-93 Scanner?
 

I own a Pro 91 scanner.Is there a reset for that one?
cuhulin

Reset on Pro-93 Scanner?
 

On Thu, 8 Nov 2007 21:34:50 -0600, wrote:

I own a Pro 91 scanner.Is there a reset for that one?

You could have found the manual on the same site. 'While holding down
keys 2 and 9, turn on the scanner. CLEAR flashes for about 8 seconds
as the scanner clears its memory'.

http://www.radioshack.com/graphics/u...0521_PM_EN.pdf

--
This is the Panic Office, section nine-seventeen may have been hit.
Activate the following procedure.