About Us

n9zas · October 21st 09, 05:43 AM

Quote:

Originally Posted by Barry OGrady

On Mon, 19 Oct 2009 08:46:40 -0800, You wrote:

In article
,
oldradioguy09 wrote:

I getting ready to shove off (ha ha) on the cruise ship paridise
carvinal line.
Last year I took along my 2 meter ht, and had a good time.
This year I will bring along my scanner. I have about 10 freqs. but am
happy to scan any more that the group my have.
Most of the freqs I have are 400mhz. Any one have others?
peace
DW.

Just remember that the Cruise Ship is likely a Foreign Flagged and
therefor under the Radio Regulations of that Country. Also, ANY
operation of a Transmitter while aboard is at the Discretion and
Authority of the ships Master.

It must have been a very old ht to have had meters. Hts have used an
LCD for a long time. He also did not say which metre band it used.

Barry
=====
Home page
http://members.iinet.net.au/~barry.og

If you would have read a bit closer,he said it was a 2 meter h.t. which means vhf 144-148mhz.
N9ZAS

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Radio Australia 9.580 Cruise Ship sinking in the Antartic.	harvey[_2_]	Shortwave	2	November 24th 07 09:12 AM
2 mtr on cruise?	Not Roger	General	0	July 15th 07 02:58 AM
SWL Shortwave while on a cruise....?	[email protected]	Shortwave	2	December 17th 06 09:17 PM
dawn cruise ship freqs ?	iflyatiger	Scanner	0	June 11th 05 03:54 AM
FS:Uniden SC180 Handheld Scanner $85 inc ship	snow	Swap	0	August 29th 03 09:09 PM