I have a PRO-2026 and wanted to know if it was possible to modify it to
receive all freq's so that there is no blanked ranges.
Thanks,
Rusty

--
"Character is doing the right thing when nobody is
looking."

In answer to your question: "no" however it can be be modified to have

un-interupted coverage from 806-956 MHz.

The following came form the mod site:

http://www.mods.dk/

Note:
It is not lawful to monitor cellular or conventional mobile telephone
conversations.

The 2026 has cellular frequencies deleted at the factory, but restoration is
the easiest ever! - clip one marked wire! All you need is a Philips
screwdriver and wire cutters.

1.. Turn the scanner upside-down and remove the four side screws holding
the bottom cover in place; pull the cover loose and set it back about two
inches out of the way.


2.. Locate the small circuit board at the lower right-hand corner and find
jumper L201. Cut it and slightly separate the break.


3.. Reassemble the radio which now has continuous 806-956 MHz coverage and
30KHz search increments in the cellular band.
2026 is a great radio
metals case
ruggedized for mobile operation
bright beautiful display
loud, quality audio
I've had one for 7 years.

"Rusty" wrote in message
news:Lf8ub.21703$3j.16526@lakeread01...
I have a PRO-2026 and wanted to know if it was possible to modify it to
receive all freq's so that there is no blanked ranges.
Thanks,
Rusty

--
"Character is doing the right thing when nobody is
looking."