Pro-2006 /why the jack on the back?
 

Can anyone tell me what the jack by the label on this 2006 is for ??

http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=40 979



remove SPAMSUCKS to reply

Why don't you ask the seller?

Bill Crocker


"Browning Mark FourA" wrote in message
...
Can anyone tell me what the jack by the label on this 2006 is for ??


http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=40 979



remove SPAMSUCKS to reply

The jacks are "tape out" and "external speaker" . Never used either of
them as I never heard anything that I wanted to hear again and the internal
speaker works fine. RM~

I did and he said he din't know
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!

On Sun, 11 Jan 2004 21:05:31 -0500, "Bill Crocker"
wrote:

Why don't you ask the seller?

Bill Crocker


"Browning Mark FourA" wrote in message
.. .
Can anyone tell me what the jack by the label on this 2006 is for ??


http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=40 979



remove SPAMSUCKS to reply





remove SPAMSUCKS to reply

I missed that jack on the first look, Cheek must have gotten his hands on
that one. RM~

"Rob Mills" wrote in message
news:57oMb.61222$PK3.12665@okepread01...

The jacks are "tape out" and "external speaker" . Never used either of
them as I never heard anything that I wanted to hear again and the
internal
speaker works fine. RM~

It says right there in the discription "to get the full effect of this
scanner you have to know your stuff". ; )

It looks like a regular phone jack, betcha it's for the computer hook up.
I've been thinking about changing the pc jack on the back of my BC895XLT to
a phone type jack. RM~

Can anyone tell me what the jack by the label on this 2006 is for ??

http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=40 979

A company in Batesburg, S.C. called A.I.E. used to sell tone decoders, and
would also do installs of the discriminator and memory interface.

They commonly used cat 5 connectors for the line between the decoder and the
scanner, with female connectors mounted about where the one is in the picture.

I have two 2006 scanners and two A.I.E. decoders - model TCF4 - mated at home.
Both were done the same way. A.I.E. sold me both the scanners and decoders, so
all I had to do was place the order, and they were shipped ready-to-use.

If the connector in the picture was not used for an A.I.E. decoder, I presume
it was still used for a discriminator tap.

Jeff Multer
Fort Mill, S.C.

Haven't you ever played "Back Jack"?

Burr

Browning Mark FourA wrote:
Can anyone tell me what the jack by the label on this 2006 is for ??

http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=40 979



remove SPAMSUCKS to reply

It's a RJ45(for networking) connector not a RJ11(for phone).

Rob Mills wrote:
It looks like a regular phone jack, betcha it's for the computer hook up.
I've been thinking about changing the pc jack on the back of my BC895XLT to
a phone type jack. RM~