|
realistic pro-34 troubleshooting
I have a pro-34 that blinks the battery low indicator, even when
powered from the ac adapter. It scans, but won't stop at any frequency, even with the squelch open. Does anyone have any experience repairing this type of problem? |
have you tried a factory reset?
has it just done this or been in a draw for a while? mike "Jeff" wrote in message om... I have a pro-34 that blinks the battery low indicator, even when powered from the ac adapter. It scans, but won't stop at any frequency, even with the squelch open. Does anyone have any experience repairing this type of problem? --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.712 / Virus Database: 468 - Release Date: 28/06/2004 |
Yes, I tried a reset and cleared all programming. It hadn't been used
for a few weeks, and was running fine prior. "mike" wrote in message news:Ci2Ec.514$3D2.469@newsfe2-win... have you tried a factory reset? has it just done this or been in a draw for a while? mike "Jeff" wrote in message om... I have a pro-34 that blinks the battery low indicator, even when powered from the ac adapter. It scans, but won't stop at any frequency, even with the squelch open. Does anyone have any experience repairing this type of problem? --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.712 / Virus Database: 468 - Release Date: 28/06/2004 |
have you tried a set of normal new AA cells?
i wonder if the AC power supply has go low volts & thus will not charge the nicads mike "Jeff" wrote in message om... Yes, I tried a reset and cleared all programming. It hadn't been used for a few weeks, and was running fine prior. "mike" wrote in message news:Ci2Ec.514$3D2.469@newsfe2-win... have you tried a factory reset? has it just done this or been in a draw for a while? mike "Jeff" wrote in message om... I have a pro-34 that blinks the battery low indicator, even when powered from the ac adapter. It scans, but won't stop at any frequency, even with the squelch open. Does anyone have any experience repairing this type of problem? --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.712 / Virus Database: 468 - Release Date: 28/06/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.712 / Virus Database: 468 - Release Date: 27/06/2004 |
Mike, the power supply is fine. there is definitely something wrong
with the unit; I just don't know where to look. thanks. "mike" wrote in message news:gmFEc.143$Ln6.98@newsfe4-gui... have you tried a set of normal new AA cells? i wonder if the AC power supply has go low volts & thus will not charge the nicads mike "Jeff" wrote in message om... Yes, I tried a reset and cleared all programming. It hadn't been used for a few weeks, and was running fine prior. "mike" wrote in message news:Ci2Ec.514$3D2.469@newsfe2-win... have you tried a factory reset? has it just done this or been in a draw for a while? mike "Jeff" wrote in message om... I have a pro-34 that blinks the battery low indicator, even when powered from the ac adapter. It scans, but won't stop at any frequency, even with the squelch open. Does anyone have any experience repairing this type of problem? --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.712 / Virus Database: 468 - Release Date: 28/06/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.712 / Virus Database: 468 - Release Date: 27/06/2004 |
ok jeff.
well i don't know the 34, but on the 39 there is a voltreg chip right by the power in plug. is the circuit diagram on the net? if so point me to it mike "Jeff" wrote in message om... Mike, the power supply is fine. there is definitely something wrong with the unit; I just don't know where to look. thanks. "mike" wrote in message news:gmFEc.143$Ln6.98@newsfe4-gui... have you tried a set of normal new AA cells? i wonder if the AC power supply has go low volts & thus will not charge the nicads mike "Jeff" wrote in message om... Yes, I tried a reset and cleared all programming. It hadn't been used for a few weeks, and was running fine prior. "mike" wrote in message news:Ci2Ec.514$3D2.469@newsfe2-win... have you tried a factory reset? has it just done this or been in a draw for a while? mike "Jeff" wrote in message om... I have a pro-34 that blinks the battery low indicator, even when powered from the ac adapter. It scans, but won't stop at any frequency, even with the squelch open. Does anyone have any experience repairing this type of problem? --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.712 / Virus Database: 468 - Release Date: 28/06/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.712 / Virus Database: 468 - Release Date: 27/06/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.712 / Virus Database: 468 - Release Date: 27/06/2004 |
| All times are GMT +1. The time now is 02:01 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com