LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Old August 23rd 04, 02:53 AM
juny
 
Posts: n/a
Default Help - PRO-37 will not recieve after sitting in drawer a few years - without batteries (any suggestions)

Anyone out there help with suggestions?

All I get is some bleed-over from an FM broadcast station. Cannot
even get NOAA weather (162.40), where their tower is on top of
adjacent mountain, maybe 2 to 3 miles away!

Did my front-end die or what?

NG on local HAM repeaters either. I always was able to get both with
mo problem!

I did reset with internal button, before that nothing would come on at
all (and yes I have fully charged NIHM's installed (is the NIMH
voltage too low?)

Also tried 9V wall wart, bleed-over came in stronger. It almost seems
that the frequencies are gone.

HELP!

juny
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
BPL - UPLC ->Repeat the lie three times and claim it for truth King Zulu Policy 213 July 16th 04 11:31 PM
New ARRL Proposal N2EY Policy 331 March 4th 04 12:02 AM
Beware of cheap counterfeit batteries felix the cat Equipment 0 October 9th 03 09:56 PM
Beware of cheap counterfeit batteries felix the cat Equipment 0 October 9th 03 09:56 PM
Beware of cheap counterfeit batteries felix the cat General 0 October 9th 03 09:56 PM


All times are GMT +1. The time now is 10:21 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017