Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
"BDK" wrote in message
... A ground plane made with an SO-239 connector and some coat hangers will blow a discone away. A total waste of money, unless you want it as a back up antenna to transmit on.... BDK A ground plane antenna, though, will limit the useful range of frequencies, won't it? I agree that it could outperform a discone at (and around) its resonant frequency, but for wideband scanning purposes, how could it outperform an antenna better optimized for wideband use like a discone? Like Donald K, I have had very good experiences with a discone. It even worked well for HF listening with compact wideband receivers that overload easily with wire antennas. On the other hand, if one needs a band-specific antenna, a ground plane would be easier and certainly cheaper. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna | |||
Outdoor Antenna and lack of intermod | Scanner | |||
FS: Kenwood TMV7-A and Compet GP-9 base antenna | Equipment |