LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #9   Report Post  
Old October 10th 04, 08:35 PM
Jason Reilly
 
Posts: n/a
Default

Hi Troy,
As for the most sensitive scanner across VHF & UHF, my answer is a Yupiteru
MVT 7100, though it is a handheld.
Let me qualify.
I don't trust sensitivity measurements - some scanners are better than spec,
others are worse. As an example, the Alinco handheld I have only lists
typical sensitivity - in many cases it is worse when tested. The 780XLT I
have is good, but not great as far as sensitivity is concerned.
I've owned quite a few scanners, and tested most of them:
Pro 2003
Pro 34
Yupiteru 5000
Icom R1
Yupiteru 7000
Yupiteru 7100
AOR 8000
Uniden 200XLT
Uniden 760XLT
Uniden 780 XLT
AOR 3000
AOR 5000
Alinco X2000
Icom 7000
and I've also made comparisons to others that fall outside the definition of
scanner, like amateur radios & commercial two way radios as well.
The Yupiteru blew them all away, offering just over 0.11uV for 12dB SINAD
under test from about 30 to 600 MHz.
But, depending on your situation, the most sensitive is not necessarily
going to be the best. You need a balance of sensitivity, interference
rejection, audio quality and maybe features and ease of use if you are
worried about those points.
By far, the best base station I have in this group is the AOR 5000. It is
quite sensitive, and suffers NO interference unless you are really close to
another transmitting station.
All other base stations in my list above suffered moderate to debilitatingly
severe blocking / intermod / etc. without the use of a FM trap (filter to
reduce the 88-108 FM broadcast band) - AOR 3000 included. The test
conditons a
outdoor antenna, Tandy Discone, elevated to 10 metres above ground with very
high quality cable, and within 10km, I have 2 x 5kW FM transmitters, and
within 40km I have 5 x 200kW FM transmitters, both line of sight. Other
radio activity is quite low, with the exception of a few 148 MHz pagers.
On a budget, though, a PRO 2006 has a good reputation.
Something a bit more upmarket, I suggest AOR 3000.
And if you want to go all out, AOR 5000.
Me, fanatic? Never....
Ta - Jason


--
To reply directly from this news group message,
please remove the STOP and JUNK and change
all 'z' to 's' in my email identity shown here.
"Troy R." wrote in message
u...
Hi all,
Was wondering if anybody had any ideas regarding what is the most
sensitive base receiver/scanner around. I am talking about VHF and UHF
sensitivity (airband in particular) and am not interested in HF.

Thanks



--
Regards
Troy Rowland



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Lightning Strike & Concrete Base Explosion Jason Dugas Antenna 10 March 4th 04 08:54 PM
FA: TRC-458 Base CB Andy Cogswell CB 16 March 3rd 04 04:38 AM
Comprehensive list of tube base types? Simon Boatanchors 5 January 28th 04 01:01 PM
"Remote Base" operation with the Kenwood TH-F6A (was: "Remote Base" operation with Icom IC-2720H) [email protected] Equipment 10 September 10th 03 03:56 AM
"Remote Base" operation with the Kenwood TH-F6A (was: "Remote Base" operation with Icom IC-2720H) [email protected] Equipment 0 September 9th 03 02:56 PM


All times are GMT +1. The time now is 08:50 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017