RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Scanner (https://www.radiobanter.com/scanner/)
-   -   Contact cleaner on BNC connection (https://www.radiobanter.com/scanner/36931-contact-cleaner-bnc-connection.html)

Frank Bals January 13th 05 02:47 PM

Contact cleaner on BNC connection
 
Is it safe to spray some contact cleaner (DeOxit) into the BNC connector on
my handheld scanner? The 2 prongs or forks look dirty and I want to get the
best connection possible....

Frank



Scan Da Bands January 13th 05 03:41 PM

Hey Frank,

Q-tip would work too.....................

On Thu, 13 Jan 2005 14:47:27 GMT, "Frank Bals"
wrote:

Is it safe to spray some contact cleaner (DeOxit) into the BNC connector on
my handheld scanner? The 2 prongs or forks look dirty and I want to get the
best connection possible....

Frank



Bill Crocker January 14th 05 02:48 AM

You might want to be careful about getting any on the plastic case of the
radio itself. It should be safe to use on the connector.

Bill Crocker


"Frank Bals" wrote in message
...
Is it safe to spray some contact cleaner (DeOxit) into the BNC connector
on my handheld scanner? The 2 prongs or forks look dirty and I want to get
the best connection possible....

Frank




clifto January 18th 05 07:07 PM

Frank Bals wrote:
Is it safe to spray some contact cleaner (DeOxit) into the BNC connector on
my handheld scanner? The 2 prongs or forks look dirty and I want to get the
best connection possible....


Yes. If you're worried about the plastic, try a bit of lighter fluid on
a normally hidden part; the cleaner in DeOxit is naphtha.

--
The state religion of the USA is atheism, as established by the courts.


All times are GMT +1. The time now is 02:51 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com