LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #4   Report Post  
Old August 17th 05, 10:16 PM
 
Posts: n/a
Default

One problem - it sounds as if the coax is going to have to be long
enough that, even with LMR600, it might not be better than an antenna
mounted lower but much closer.


I am going to go and measure again, but assuming I measured wrong
before, Is a 100 foot run too long for the antenna to work properly? I
am probabaly going to use 300 ohm twin lead for the lead in, unless
people think it should really be coax. See a picture of the proposed
set up at http://community.webshots.com/photo/...24626583NExHgY

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted ground plane antenna: compared with normal GP and low dipole. Serge Stroobandt, ON4BAA Antenna 8 February 24th 11 10:22 PM
Yaesu FT-857D questions Joe S. Equipment 6 October 25th 04 09:40 AM
R75 Antenna Brian Shortwave 11 February 11th 04 04:59 PM
QST Article: An Easy to Build, Dual-Band Collinear Antenna Serge Stroobandt, ON4BAA Antenna 12 October 16th 03 07:44 PM


All times are GMT +1. The time now is 04:27 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017