RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Scanner (https://www.radiobanter.com/scanner/)
-   -   Pro-43 keypad replacement (https://www.radiobanter.com/scanner/96557-pro-43-keypad-replacement.html)

A. Pismo Clam June 15th 06 02:25 AM

Pro-43 keypad replacement
 
Has anyone accomplished this repair? How difficult is this repair

How do you get the bloody scanner faceplate off to swap the keypad out? :-(

Alain

BDK June 15th 06 02:48 AM

Pro-43 keypad replacement
 
In article ,
says...
Has anyone accomplished this repair? How difficult is this repair

How do you get the bloody scanner faceplate off to swap the keypad out? :-(

Alain


I have done, well, over a hundred. It's easy, but you have to be
reasonably good with a soldering iron.

There used to be a site with pics, but it's gone.

The front doesn't come off, you go through the BACK.

First, you take the back case off. Unsolder the center of the BNC
connector. It's sticking up through a hole in the top PC board
Once the connector's center wire is free and clear, unscrew all the
little screws around the outside, and the Top PC board pulls off.
The second PC board unplugs after screws are removed. Then the bottom PC
board is removed, and then you have to unsolder the shield off the back
of the front panel/CPU board. I think there are 4 places to unsolder,
then the keyboard can be accessed. The keyboard just drops out, and the
new one drops in, and it gets put back together.

It's hard the first time, gets easier, to the point it's a 10 minute
job, max. I've replaced my own keypad 5 or six times now. One guy is on
his tenth, and that will probably be the last one, as the 43 is beyond
tired at this point.

If you don't know what you are doing, and don't have a small iron and
solder suckers, etc, don't do it, as I had a whole bag of dead 34s 37s,
39s, and 43s that I couldn't save individually, but was able to
make whole working radios from later on. They were all "donations" from
people who ruined their scanner trying to mod it, or replace the keypad.
(It's the same procedure, to a point)

Good luck..

BDK

news.vif.com June 15th 06 05:24 PM

Pro-43 keypad replacement
 
GET RID OF PEACE OF ****!

RADIO SHACK SCANNER SUXS!

A. Pismo Clam wrote:
Has anyone accomplished this repair? How difficult is this repair

How do you get the bloody scanner faceplate off to swap the keypad out? :-(

Alain




---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 0624-2, 06/15/2006
Tested on: 6/15/2006 12:24:05 PM
avast! - copyright (c) 1988-2006 ALWIL Software.
http://www.avast.com




news.vif.com June 16th 06 06:29 AM

Pro-43 keypad replacement
 


Homer.Simpson wrote:
news.vif.com said


GET RID OF PEACE OF ****!

RADIO SHACK SCANNER SUXS!



Ok, how about some recommendations for a trunking EDACS scanner.

www.uniden.com

Anyone says uniden suxs! ROYALLY **** OFF YOUR WRONG!


---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 0624-2, 06/15/2006
Tested on: 6/16/2006 1:29:26 AM
avast! - copyright (c) 1988-2006 ALWIL Software.
http://www.avast.com




Jack Ricci June 16th 06 07:01 PM

Pro-43 keypad replacement
 
RADIO SHACK SCANNER SUXS!


In Canada, the " Radio Shack " stores are now called " The Source "
and are affiliated with Circuit City of the USA. They do not sell scanners
anymore...but when they did, many of the better scanners were made for them
by Uniden, but with the Realistic Pro name stamped on them. Some of them
were not junk...

Jack

"news.vif.com" wrote in message
...


Homer.Simpson wrote:
news.vif.com said


GET RID OF PEACE OF ****!

RADIO SHACK SCANNER SUXS!



Ok, how about some recommendations for a trunking EDACS scanner.

www.uniden.com

Anyone says uniden suxs! ROYALLY **** OFF YOUR WRONG!


---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 0624-2, 06/15/2006
Tested on: 6/16/2006 1:29:26 AM
avast! - copyright (c) 1988-2006 ALWIL Software.
http://www.avast.com






Frank June 18th 06 04:29 AM

Pro-43 keypad replacement
 
I love how some people make a stupid statement (my PRO-43 is one of the best
scanners ever made) and then are too coward to use a real e-mail address!

Frank


"news.vif.com" wrote in message
...
GET RID OF PEACE OF ****!

RADIO SHACK SCANNER SUXS!

A. Pismo Clam wrote:
Has anyone accomplished this repair? How difficult is this repair

How do you get the bloody scanner faceplate off to swap the keypad out?
:-(

Alain




---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 0624-2, 06/15/2006
Tested on: 6/15/2006 12:24:05 PM
avast! - copyright (c) 1988-2006 ALWIL Software.
http://www.avast.com






Al Klein June 18th 06 04:38 AM

Pro-43 keypad replacement
 
On Sun, 18 Jun 2006 03:29:33 GMT, "Frank"
wrote:

I love how some people make a stupid statement (my PRO-43 is one of the best
scanners ever made) and then are too coward to use a real e-mail address!


He makes the same statement no matter which scanner is being discussed
each time he pulls his head out of his ass - which seems to be once
every couple of weeks.

Frank June 18th 06 04:49 AM

Pro-43 keypad replacement
 
with a fake e-mail address....the sign of a true coward!


"Al Klein" wrote in message
...
On Sun, 18 Jun 2006 03:29:33 GMT, "Frank"
wrote:

I love how some people make a stupid statement (my PRO-43 is one of the
best
scanners ever made) and then are too coward to use a real e-mail address!


He makes the same statement no matter which scanner is being discussed
each time he pulls his head out of his ass - which seems to be once
every couple of weeks.





All times are GMT +1. The time now is 08:19 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com