Clear all channels on Pro 34??
 

http://www.grove-ent.com/microprocessorreset.html

mike

"Phil" wrote in message
k.net...
Any way to clear all the channels on a Pro 34 in one step or do I have to
clear each channel individually?
Thanks
Phil

Clear all channels on Pro 34??
 

"mikeFNB" wrote in message
...
http://www.grove-ent.com/microprocessorreset.html

mike

Thanks Mike, but the Pro 34 was not listed there. In any case I tried both
the Man, 2, 9 procedure and the 2, 9 procedure alone and the Pro 43 Clear, 0
method and nothing worked, all frequencies still there. Don't know if for
some reason the Pro 34 is different.

Phil

Clear all channels on Pro 34??
 

ok there is a reset cause i used to have one and did it.
there is not a little hole inthe case is there?

certainly is on the 39

mike

"Phil" wrote in message
ink.net...

"mikeFNB" wrote in message
...
http://www.grove-ent.com/microprocessorreset.html

mike

Thanks Mike, but the Pro 34 was not listed there. In any case I tried both
the Man, 2, 9 procedure and the 2, 9 procedure alone and the Pro 43 Clear,
0
method and nothing worked, all frequencies still there. Don't know if for
some reason the Pro 34 is different.

Phil

Clear all channels on Pro 34??
 

reading the online manual he
http://support.radioshack.com/suppor...nics/26441.htm
it reads there is a reset switch on the side like the 39

mike

"Phil" wrote in message
ink.net...

"mikeFNB" wrote in message
...
http://www.grove-ent.com/microprocessorreset.html

mike

Thanks Mike, but the Pro 34 was not listed there. In any case I tried both
the Man, 2, 9 procedure and the 2, 9 procedure alone and the Pro 43 Clear,
0
method and nothing worked, all frequencies still there. Don't know if for
some reason the Pro 34 is different.

Phil

Clear all channels on Pro 34??
 

"mikeFNB" wrote in message
...
ok there is a reset cause i used to have one and did it.
there is not a little hole inthe case is there?

certainly is on the 39

mike

Yup, thanks, found it. The reset is under the battery pack with a little
access area to stick a paper clip down there to push the button.
Phil