How do you fix the Redsun RP2100?
 

I bought this from Liypn as I bought a Degen 1103 from her awhile ago
(which also needs replacing but I don't think that's her fault)

Basically this radio crashes...from what she said is that if it doesn't
turn on it means it's in a constantly loop software wise. First she
says to reset it (which I have on many a time) then she said if it
doesn't work to take out any powersource (AC or battery) and then to
wait 24 hours...reset it and put the batteries in it.

That worked before but then it crashed again.

When the radio works it's fantastic. I bought to replace a Grundig S350
(which is also great however has way too much drift and the wide switch
doesn't seem to work..i.e. I only get narrow...so if it drifts and the
wide function doesn't work it's frustrating)

In terms of what causes this for the Redsun is I thought I heard
something about a static charge...if this is true then this doesn't
take much!

Any help would be greatfully appreciated.

How do you fix the Redsun RP2100?
 

If the radio is still in warranty,send it back for another one.
cuhulin

How do you fix the Redsun RP2100?
 

"mpd" wrote in message
ps.com...
I bought this from Liypn as I bought a Degen 1103 from her awhile ago
(which also needs replacing but I don't think that's her fault)

Basically this radio crashes...from what she said is that if it doesn't
turn on it means it's in a constantly loop software wise. First she
says to reset it (which I have on many a time) then she said if it
doesn't work to take out any powersource (AC or battery) and then to
wait 24 hours...reset it and put the batteries in it.

That worked before but then it crashed again.

When the radio works it's fantastic. I bought to replace a Grundig S350
(which is also great however has way too much drift and the wide switch
doesn't seem to work..i.e. I only get narrow...so if it drifts and the
wide function doesn't work it's frustrating)

In terms of what causes this for the Redsun is I thought I heard
something about a static charge...if this is true then this doesn't
take much!

Any help would be greatfully appreciated.


Did you check to make sure the sleep timer is activated? If it is, the radio
will shut off after a specified time. Check the manual.

Rich

How do you fix the Redsun RP2100?
 

I wouldn't want to ship it back as I would have to pay $30 for shipping
both ways....

There was no sleep timer on and it didn't come with a manual. I've
found one online but it didn't get that technical for troubleshooting.

How do you fix the Redsun RP2100?
 

mpd wrote:
I bought this from Liypn as I bought a Degen 1103 from her awhile ago
(which also needs replacing but I don't think that's her fault)

Basically this radio crashes...from what she said is that if it doesn't
turn on it means it's in a constantly loop software wise. First she
says to reset it (which I have on many a time) then she said if it
doesn't work to take out any powersource (AC or battery) and then to
wait 24 hours...reset it and put the batteries in it.

That worked before but then it crashed again.

When the radio works it's fantastic. I bought to replace a Grundig S350
(which is also great however has way too much drift and the wide switch
doesn't seem to work..i.e. I only get narrow...so if it drifts and the
wide function doesn't work it's frustrating)

In terms of what causes this for the Redsun is I thought I heard
something about a static charge...if this is true then this doesn't
take much!

Any help would be greatfully appreciated.

I'de just throw that Chinese-made, Grundig S350 look-alike in the
garbage-heap !

How do you fix the Redsun RP2100?
 

mpd wrote:
I wouldn't want to ship it back as I would have to pay $30 for shipping
both ways....

There was no sleep timer on and it didn't come with a manual. I've
found one online but it didn't get that technical for troubleshooting.

Did you try smacking it a couple of times? That is one of the first
things you want to try. It works for radios sometimes.

73
NEO

How do you fix the Redsun RP2100?
 

Like I wrote elsewhere, the keys are a bit stubborn on this set - they
apparently lack some kind of force distribution underneath to ensure
that the whole area works equally well. The actual switches are not
always exactly where you expect them, so hitting the right spot helps.
Don't give up if things don't work the first time, just try again and
push a bit more and longer - hold the set on the back if necessary. (If
I only push power on my TRA-2350P/RP2000 briefly, nothing will happen
either. Apply some more pressure, and the set comes to life.) Admittedly
it's an annoyance that shouldn't be there out of the beta phase, and it
bugs me the most on the tuning step keys which can take a number of
tries to finally react. In any case I have not needed to use the reset a
single time (like it should be). My set didn't even get cunf00sed when
the total battery voltage dropped to 0.9 V, though the clock was off
afterwards... Why the light tends to come back on when I remove AC power
is another matter, that's probably a simple bug.

If the microprocessor should really lock up, I would blame some kind of
production error (a bad solder joint might do). In this case the rx
would need to be returned.

Stephan
--
Home: http://stephan.win31.de/
Bytes are generally harmless - unless taken to bits.

How do you fix the Redsun RP2100?
 

"mpd" wrote in message
ups.com...
I wouldn't want to ship it back as I would have to pay $30 for shipping
both ways....

There was no sleep timer on and it didn't come with a manual. I've
found one online but it didn't get that technical for troubleshooting.

Yes there is. Here is a copy/paste from my manual which you should have
gotten with it.

****

4. Adjusting the Sleep Time

Press the POWER / SLEEP button (8) once, the LCD panel will
display the "60" and the signs, representing that the radio will
be turned off in 60 minutes time.

If you wish to change the sleep time, press the POWER / SLEEP
button (8) again before it disappears, the figures on the LCD panel
will change as follows:

90 - 60 - 45 - 30 - 15 - 5 - 1 - on - (back to 90)

If you stop at 30, the radio will be turned off automatically within 30
minutes.

If you stop at "on", the radio will be turned on until further manual
intervention, the will not appear on the LCD panel.

****

If your radio is "crashing" (shutting off after a time) this is what's going
on.

Keep us posted. It really is a nice unit. I got two, I liked it so much.

Rich

How do you fix the Redsun RP2100?
 

Nothing happens in pressing power...infact I've pressed it to the point
of it being tilted a bit.

I'm starting to think that there's a problem with the design with the
way the weight is distributed on the buttons. On the Degen I had there
was a gradual wearing down (and dirt or something else) that got on the
knob so when you turned it it didn't fully correspond (so it went up
sometimes when you went down and vice versa)

has anyone taken these things apart? I thought I saw some pictures of
this apart...

How do you fix the Redsun RP2100?
 

OK I know this sounds odd so I sort of dropped it/ hit it a few times.

Well now it kinda works...

Audio is fine and I can tune things...but the bottons on the side don't
work, I can't turn it off....

Ok I just reset it and now it won't turn on again!

I think I'm going to just take out the batteries and let it sit till
maybe 8pm tomorrow