LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #16   Report Post  
Old June 14th 07, 09:21 PM posted to rec.radio.shortwave
external usenet poster
 
First recorded activity by RadioBanter: May 2007
Posts: 37
Default Kenwood R-5000 with RS-232, level converter and Int'l Radio 6kHz filter

In article . com,
says...
On Jun 14, 3:01 am, JeroenK wrote:
Roadie wrote:
If you would have taken
the cover off, it was more than obvious. I wonder how many R5000's
failed due to one of those regs cooking itself to death.


I haven't heard of one. The receiver has been around since 1987 so I
would assume that stories of R5000 receivers burning up from "super
heat" would be all over the net by now. How many failures have you
read of that are traceable to overheating. Indeed how many of those
receivers have failed for any reason. Not many in my experience.


Dont know either, but I know mine ran HOT. And just for the lost energy
alone it was enough for me to decide and buy an external 13,8v supply.
Now I can safely put something on top of the rx again (like a logbook or
guide) without having to worry about all that heat...

--
JeroenK


And I've owned stereos that put out some heat but ran for years. The
real question is whether Kenwood engineers considered the heat in the
radio design. Given the radio's excellent design, high performance
and record of reliability I suspect they did. The radio was well
vented so the heat was dissipated.



And that excellent design, did it extend to the stock wide AM filter?

LOL.

If the part normally runs so hot it will burn fingers, that's too hot!
And that's with the case off. I've never had a stereo amp or receiver
that ran as hot as both my R5000's did, and I've had a lot of equipment
over the 40+ years since I bought my first stereo receiver in 1966.

BDK
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wanted: VC-20 VHF Converter Kenwood R-5000 [email protected] Swap 0 May 12th 06 12:41 AM
WANTED Kenwood filter YK-88A (AM 6KHz) for TS-430S Opcom Boatanchors 3 July 5th 05 08:41 AM
WANTED Kenwood filter YK-88A (AM 6KHz) for TS-430S Opcom Equipment 3 July 5th 05 08:41 AM
WANTED Kenwood filter YK-88A (AM 6KHz) for TS-430S Opcom General 3 July 5th 05 08:41 AM
Kenwood R-5000 VHF converter mike maghakian Swap 0 May 19th 05 08:04 AM


All times are GMT +1. The time now is 01:40 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017