RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Shortwave (https://www.radiobanter.com/shortwave/)
-   -   Amateur's question regarding gain and squelch (https://www.radiobanter.com/shortwave/124519-amateurs-question-regarding-gain-squelch.html)

Monty September 3rd 07 05:32 PM

Amateur's question regarding gain and squelch
 
I hope this is the correct forum for this question. If not, could
some one direct me to a better one?

I'm looking for a layman's definition of the differences between
squelch and gain. I ask this because I've recently purchased a new
aviation headset which doesn't impress me with its performance, but
I'm new at this so I'm pretty sure I have to mess with the headset's
gain (it's adjustable) and the radio's squelch. The intercom that the
headset gets connected to is voice activated, but I can't seem to get
things set where the microphone doesn't pick up the background noise.
Plus, the sound is very muted, although that might simply be a
function of how close the mike is to my mouth. I believe squelch
could be set to the proper level of voice activation, but where does
the gain figure in?

Could I get some pointers on this?

Thanks


Salmon Egg September 4th 07 11:48 PM

Amateur's question regarding gain and squelch
 
On 9/3/07 9:32 AM, in article
, "Monty"
wrote:

I hope this is the correct forum for this question. If not, could
some one direct me to a better one?

I'm looking for a layman's definition of the differences between
squelch and gain. I ask this because I've recently purchased a new
aviation headset which doesn't impress me with its performance, but
I'm new at this so I'm pretty sure I have to mess with the headset's
gain (it's adjustable) and the radio's squelch. The intercom that the
headset gets connected to is voice activated, but I can't seem to get
things set where the microphone doesn't pick up the background noise.
Plus, the sound is very muted, although that might simply be a
function of how close the mike is to my mouth. I believe squelch
could be set to the proper level of voice activation, but where does
the gain figure in?

Could I get some pointers on this?

Thanks

In simple terms:
Gain corresponds to volume control. Loudness can be set.
Squelch is a feature that prevents signal from being sent unless it exceeds
a certain level. It is used to avoid listening to noise when only weak
signals are present.

Bill
--
Fermez le Bush--less than 18 months to go.




All times are GMT +1. The time now is 11:09 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com