RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Shortwave (https://www.radiobanter.com/shortwave/)
-   -   The Verdict {One Man's Opinion} : Magnetic Longwire Balun IsToo Expensive (https://www.radiobanter.com/shortwave/128377-re-verdict-%7Bone-mans-opinion%7D-magnetic-longwire-balun-istoo-expensive.html)

David[_5_] December 19th 07 02:15 AM

The Verdict {One Man's Opinion} : Magnetic Longwire Balun IsToo Expensive
 
RHF wrote:
The Verdict {One Man's Opinion} : Magnetic Longwire Balun Is Too
Expensive

http://www.hard-core-dx.com/nordicdx.../magbalun.html

-by- Alan Johnson

-source- Hard-Cord-DX website : http://www.hard-core-dx.com/
The Most Common Antenna Type
Randon Wire Antenna Problems
Enter the Balun
The Magnetic Longwire Balun (MLB)
In the Laboratory
After Four Rainy WeekEnds
I also did A-B Comparisons
* The Results
The "Resistance" Curve for the MLB
The N8KDV Transformer
A-B Testing was very Revealing.
* Recommenation
How Essential is a Perfect Match?
Based on Price and Performance
The MLB Definitely Wins

Originally Published in the NASWA Journal - July 1992
-by- Alan Johnson [N4LUS]

Magnetic Longwire Balun (MLB)
http://www.universal-radio.com/catalog/sw_ant/1484.html
http://www.dolstra.nl/Z&L-amateur/AN...tems/MLB_1.JPG
http://www.remeeus.eu/english/hamradio/mlb.htm
http://ham.srsab.se/graphics/antennas/mlbII.jpg
-by- RF Systems - MSRP Price ~ $60

Alternative "MLB" - MLB-1 Magnetic Longwire Balun
http://www.palomar-engineers.com/MLB-1/mlb-1.html
-by- Palomar Engineers - MSRP Price ~ $50

NOTE - While the 'N8KDV Transformer' is presently Not Available.
WinRadio does offer the LWA-0130 Long Wire Antenna Adapter
http://www.grove-ent.com/WR0130.html
http://www.winradio.com/home/lwa.htm
http://www.winradio.com/home/ax05e.htm
-by- WiNRADiO - - MSRP Price ~ $40
READ - Good Deal on 9:1 Matching Transformer
http://groups.google.com/group/rec.r...e40978fdc32ac0
-by- William Fieldstone
More WinRadio LWA-0130 Long Wire Antenna Adapter Postings
http://groups.google.com/group/rec.r...7d380609eec592
http://groups.yahoo.com/group/Shortw...na/message/230


iane ~ RHF
.


[D]iane,

The point is to keep the feedpoint Z below the transmission line Z.

You're welcome.

Telamon December 19th 07 02:32 AM

The Verdict {One Man's Opinion} : Magnetic Longwire Balun Is Too Expensive
 
In article ,
David wrote:

RHF wrote:
The Verdict {One Man's Opinion} : Magnetic Longwire Balun Is Too
Expensive

http://www.hard-core-dx.com/nordicdx.../magbalun.html

-by- Alan Johnson

-source- Hard-Cord-DX website : http://www.hard-core-dx.com/
The Most Common Antenna Type
Randon Wire Antenna Problems
Enter the Balun
The Magnetic Longwire Balun (MLB)
In the Laboratory
After Four Rainy WeekEnds
I also did A-B Comparisons
* The Results
The "Resistance" Curve for the MLB
The N8KDV Transformer
A-B Testing was very Revealing.
* Recommenation
How Essential is a Perfect Match?
Based on Price and Performance
The MLB Definitely Wins

Originally Published in the NASWA Journal - July 1992
-by- Alan Johnson [N4LUS]

Magnetic Longwire Balun (MLB)
http://www.universal-radio.com/catalog/sw_ant/1484.html
http://www.dolstra.nl/Z&L-amateur/AN...tems/MLB_1.JPG
http://www.remeeus.eu/english/hamradio/mlb.htm
http://ham.srsab.se/graphics/antennas/mlbII.jpg
-by- RF Systems - MSRP Price ~ $60

Alternative "MLB" - MLB-1 Magnetic Longwire Balun
http://www.palomar-engineers.com/MLB-1/mlb-1.html
-by- Palomar Engineers - MSRP Price ~ $50

NOTE - While the 'N8KDV Transformer' is presently Not Available.
WinRadio does offer the LWA-0130 Long Wire Antenna Adapter
http://www.grove-ent.com/WR0130.html
http://www.winradio.com/home/lwa.htm
http://www.winradio.com/home/ax05e.htm
-by- WiNRADiO - - MSRP Price ~ $40
READ - Good Deal on 9:1 Matching Transformer
http://groups.google.com/group/rec.r...e40978fdc32ac0
-by- William Fieldstone
More WinRadio LWA-0130 Long Wire Antenna Adapter Postings
http://groups.google.com/group/rec.r...7d380609eec592
http://groups.yahoo.com/group/Shortw...na/message/230


iane ~ RHF
.


[D]iane,

The point is to keep the feedpoint Z below the transmission line Z.


What's the advantage of the feed-point Z being below the transmission
line Z?

--
Telamon
Ventura, California

Telamon December 23rd 07 04:36 AM

The Verdict {One Man's Opinion} : Magnetic Longwire Balun Is Too Expensive
 
In article
,
Telamon wrote:

In article ,
David wrote:

RHF wrote:
The Verdict {One Man's Opinion} : Magnetic Longwire Balun Is Too
Expensive

http://www.hard-core-dx.com/nordicdx.../magbalun.html

-by- Alan Johnson

-source- Hard-Cord-DX website : http://www.hard-core-dx.com/
The Most Common Antenna Type
Randon Wire Antenna Problems
Enter the Balun
The Magnetic Longwire Balun (MLB)
In the Laboratory
After Four Rainy WeekEnds
I also did A-B Comparisons
* The Results
The "Resistance" Curve for the MLB
The N8KDV Transformer
A-B Testing was very Revealing.
* Recommenation
How Essential is a Perfect Match?
Based on Price and Performance
The MLB Definitely Wins

Originally Published in the NASWA Journal - July 1992
-by- Alan Johnson [N4LUS]

Magnetic Longwire Balun (MLB)
http://www.universal-radio.com/catalog/sw_ant/1484.html
http://www.dolstra.nl/Z&L-amateur/AN...tems/MLB_1.JPG
http://www.remeeus.eu/english/hamradio/mlb.htm
http://ham.srsab.se/graphics/antennas/mlbII.jpg
-by- RF Systems - MSRP Price ~ $60

Alternative "MLB" - MLB-1 Magnetic Longwire Balun
http://www.palomar-engineers.com/MLB-1/mlb-1.html
-by- Palomar Engineers - MSRP Price ~ $50

NOTE - While the 'N8KDV Transformer' is presently Not Available.
WinRadio does offer the LWA-0130 Long Wire Antenna Adapter
http://www.grove-ent.com/WR0130.html
http://www.winradio.com/home/lwa.htm
http://www.winradio.com/home/ax05e.htm
-by- WiNRADiO - - MSRP Price ~ $40
READ - Good Deal on 9:1 Matching Transformer
http://groups.google.com/group/rec.r...e40978fdc32ac0
-by- William Fieldstone
More WinRadio LWA-0130 Long Wire Antenna Adapter Postings
http://groups.google.com/group/rec.r...7d380609eec592
http://groups.yahoo.com/group/Shortw...na/message/230


iane ~ RHF
.


[D]iane,

The point is to keep the feedpoint Z below the transmission line Z.


What's the advantage of the feed-point Z being below the transmission
line Z?


OK I'll answer it. None.

--
Telamon
Ventura, California

David[_5_] December 23rd 07 02:02 PM

The Verdict {One Man's Opinion} : Magnetic Longwire Balun IsToo Expensive
 
Telamon wrote:
In article
,
Telamon wrote:

In article ,
David wrote:

RHF wrote:
The Verdict {One Man's Opinion} : Magnetic Longwire Balun Is Too
Expensive

http://www.hard-core-dx.com/nordicdx.../magbalun.html

-by- Alan Johnson

-source- Hard-Cord-DX website : http://www.hard-core-dx.com/
The Most Common Antenna Type
Randon Wire Antenna Problems
Enter the Balun
The Magnetic Longwire Balun (MLB)
In the Laboratory
After Four Rainy WeekEnds
I also did A-B Comparisons
* The Results
The "Resistance" Curve for the MLB
The N8KDV Transformer
A-B Testing was very Revealing.
* Recommenation
How Essential is a Perfect Match?
Based on Price and Performance
The MLB Definitely Wins

Originally Published in the NASWA Journal - July 1992
-by- Alan Johnson [N4LUS]

Magnetic Longwire Balun (MLB)
http://www.universal-radio.com/catalog/sw_ant/1484.html
http://www.dolstra.nl/Z&L-amateur/AN...tems/MLB_1.JPG
http://www.remeeus.eu/english/hamradio/mlb.htm
http://ham.srsab.se/graphics/antennas/mlbII.jpg
-by- RF Systems - MSRP Price ~ $60

Alternative "MLB" - MLB-1 Magnetic Longwire Balun
http://www.palomar-engineers.com/MLB-1/mlb-1.html
-by- Palomar Engineers - MSRP Price ~ $50

NOTE - While the 'N8KDV Transformer' is presently Not Available.
WinRadio does offer the LWA-0130 Long Wire Antenna Adapter
http://www.grove-ent.com/WR0130.html
http://www.winradio.com/home/lwa.htm
http://www.winradio.com/home/ax05e.htm
-by- WiNRADiO - - MSRP Price ~ $40
READ - Good Deal on 9:1 Matching Transformer
http://groups.google.com/group/rec.r...e40978fdc32ac0
-by- William Fieldstone
More WinRadio LWA-0130 Long Wire Antenna Adapter Postings
http://groups.google.com/group/rec.r...7d380609eec592
http://groups.yahoo.com/group/Shortw...na/message/230


iane ~ RHF
.

[D]iane,

The point is to keep the feedpoint Z below the transmission line Z.


What's the advantage of the feed-point Z being below the transmission
line Z?


OK I'll answer it. None.


Less pinching in the midriff...

There's a rule.

Telamon December 23rd 07 09:27 PM

The Verdict {One Man's Opinion} : Magnetic Longwire Balun Is Too Expensive
 
In article ,
David wrote:

Telamon wrote:
In article
,
Telamon wrote:

In article ,
David wrote:

RHF wrote:
The Verdict {One Man's Opinion} : Magnetic Longwire Balun Is Too
Expensive

http://www.hard-core-dx.com/nordicdx.../magbalun.html

-by- Alan Johnson

-source- Hard-Cord-DX website : http://www.hard-core-dx.com/
The Most Common Antenna Type
Randon Wire Antenna Problems
Enter the Balun
The Magnetic Longwire Balun (MLB)
In the Laboratory
After Four Rainy WeekEnds
I also did A-B Comparisons
* The Results
The "Resistance" Curve for the MLB
The N8KDV Transformer
A-B Testing was very Revealing.
* Recommenation
How Essential is a Perfect Match?
Based on Price and Performance
The MLB Definitely Wins

Originally Published in the NASWA Journal - July 1992
-by- Alan Johnson [N4LUS]

Magnetic Longwire Balun (MLB)
http://www.universal-radio.com/catalog/sw_ant/1484.html
http://www.dolstra.nl/Z&L-amateur/AN...tems/MLB_1.JPG
http://www.remeeus.eu/english/hamradio/mlb.htm
http://ham.srsab.se/graphics/antennas/mlbII.jpg
-by- RF Systems - MSRP Price ~ $60

Alternative "MLB" - MLB-1 Magnetic Longwire Balun
http://www.palomar-engineers.com/MLB-1/mlb-1.html
-by- Palomar Engineers - MSRP Price ~ $50

NOTE - While the 'N8KDV Transformer' is presently Not Available.
WinRadio does offer the LWA-0130 Long Wire Antenna Adapter
http://www.grove-ent.com/WR0130.html
http://www.winradio.com/home/lwa.htm
http://www.winradio.com/home/ax05e.htm
-by- WiNRADiO - - MSRP Price ~ $40
READ - Good Deal on 9:1 Matching Transformer
http://groups.google.com/group/rec.r...e40978fdc32ac0
-by- William Fieldstone
More WinRadio LWA-0130 Long Wire Antenna Adapter Postings
http://groups.google.com/group/rec.r...7d380609eec592
http://groups.yahoo.com/group/Shortw...na/message/230


iane ~ RHF
.

[D]iane,

The point is to keep the feedpoint Z below the transmission line Z.

What's the advantage of the feed-point Z being below the transmission
line Z?


OK I'll answer it. None.


Less pinching in the midriff...

There's a rule.


OK here is the rule, when you have an impedance mismatch by some ratio
it does not matter which system element is higher or lower so for
example if the coax transmission line is 50 ohms and the antenna
impedance is 25 or 75 ohms the result is the same amount of reflected
power. 25 ohms and 75 ohms are equivalent in this regard. One is not a
better situation than the other.

Take an extreme case of this where you have either a short or the coax
is open with nothing connected on that end. In either case if you were
to send RF power to the open or short end of the cable you would have
100% reflected power. The returned phase of the that power would be 90
degrees different though.

This is different situation then DC current where the open and short
would have very different consequences.

--
Telamon
Ventura, California

RHF December 24th 07 01:37 AM

The Verdict {One Man's Opinion} : Magnetic Longwire Balun Is TooExpensive
 
On Dec 23, 1:27*pm, Telamon
wrote:
In article ,





*David wrote:
Telamon wrote:
In article
,
*Telamon wrote:


In article ,
*David wrote:


RHF wrote:
The Verdict {One Man's Opinion} : Magnetic Longwire Balun Is Too
Expensive


http://www.hard-core-dx.com/nordicdx.../magbalun.html


-by- Alan Johnson


-source- Hard-Cord-DX website :http://www.hard-core-dx.com/
The Most Common Antenna Type
Randon Wire Antenna Problems
Enter the Balun
The Magnetic Longwire Balun (MLB)
In the Laboratory
After Four Rainy WeekEnds
I also did A-B Comparisons
* The Results
The "Resistance" Curve for the MLB
The N8KDV Transformer
A-B Testing was very Revealing.
* Recommenation
How Essential is a Perfect Match?
Based on Price and Performance
The MLB Definitely Wins


Originally Published in the NASWA Journal - July 1992
-by- Alan Johnson [N4LUS]


Magnetic Longwire Balun (MLB)
http://www.universal-radio.com/catalog/sw_ant/1484.html
http://www.dolstra.nl/Z&L-amateur/AN...tems/MLB_1.JPG
http://www.remeeus.eu/english/hamradio/mlb.htm
http://ham.srsab.se/graphics/antennas/mlbII.jpg
-by- RF Systems - MSRP Price ~ $60


Alternative "MLB" - MLB-1 Magnetic Longwire Balun
http://www.palomar-engineers.com/MLB-1/mlb-1.html
-by- Palomar Engineers - MSRP Price ~ $50


NOTE - While the 'N8KDV Transformer' is presently Not Available.
WinRadio does offer the LWA-0130 Long Wire Antenna Adapter
http://www.grove-ent.com/WR0130.html
http://www.winradio.com/home/lwa.htm
http://www.winradio.com/home/ax05e.htm
-by- WiNRADiO - *- MSRP Price ~ $40
READ - Good Deal on 9:1 Matching Transformer
http://groups.google.com/group/rec.r...e40978fdc32ac0
-by- William Fieldstone
More WinRadio LWA-0130 Long Wire Antenna Adapter Postings
http://groups.google.com/group/rec.r...7d380609eec592
http://groups.yahoo.com/group/Shortw...na/message/230


iane ~ RHF
*.


[D]iane,


The point is to keep the feedpoint Z below the transmission line Z.


What's the advantage of the feed-point Z being below the transmission
line Z?


OK I'll answer it. None.


Less pinching in the midriff...


There's a rule.


? OK here is the rule, when you have an impedance mismatch
? by some ratio it does not matter which system element is
? higher or lower so for example if the coax transmission
? line is 50 ohms and the antenna impedance is 25 or 75 ohms
? the result is the same amount of reflected power.
? 25 ohms and 75 ohms are equivalent in this regard.
? One is not a better situation than the other.

Telamon,

Wouldn't it be the Ratios :

25 Ù Antenna to 50 Ù Coax ~ 1 : 2

50 Ù Coax to 100 Ù Antenna ~ 1 : 2
-vice- 50 Ù Coax to 75 Ù Antenna ~ 2 : 3 (1 : 1.5)

~ RHF

- Take an extreme case of this where you have either a short
- or the coax is open with nothing connected on that end.
- In either case if you were to send RF power to the open
- or short end of the cable you would have 100% reflected
- power. The returned phase of the that power would be 90
- degrees different though.
-
- This is different situation then DC current where the open
- and short would have very different consequences.
-
- --
- Telamon
- Ventura, California

Telamon December 24th 07 11:13 PM

The Verdict {One Man's Opinion} : Magnetic Longwire Balun Is Too Expensive
 
In article ,
David wrote:

RHF wrote:
On Dec 23, 1:27 pm, Telamon
wrote:
In article ,





David wrote:
Telamon wrote:
In article
,
Telamon wrote:
In article ,
David wrote:
RHF wrote:
The Verdict {One Man's Opinion} : Magnetic Longwire Balun Is Too
Expensive
http://www.hard-core-dx.com/nordicdx.../magbalun.html
-by- Alan Johnson
-source- Hard-Cord-DX website :http://www.hard-core-dx.com/
The Most Common Antenna Type
Randon Wire Antenna Problems
Enter the Balun
The Magnetic Longwire Balun (MLB)
In the Laboratory
After Four Rainy WeekEnds
I also did A-B Comparisons
* The Results
The "Resistance" Curve for the MLB
The N8KDV Transformer
A-B Testing was very Revealing.
* Recommenation
How Essential is a Perfect Match?
Based on Price and Performance
The MLB Definitely Wins
Originally Published in the NASWA Journal - July 1992
-by- Alan Johnson [N4LUS]
Magnetic Longwire Balun (MLB)
http://www.universal-radio.com/catalog/sw_ant/1484.html
http://www.dolstra.nl/Z&L-amateur/AN...tems/MLB_1.JPG
http://www.remeeus.eu/english/hamradio/mlb.htm
http://ham.srsab.se/graphics/antennas/mlbII.jpg
-by- RF Systems - MSRP Price ~ $60
Alternative "MLB" - MLB-1 Magnetic Longwire Balun
http://www.palomar-engineers.com/MLB-1/mlb-1.html
-by- Palomar Engineers - MSRP Price ~ $50
NOTE - While the 'N8KDV Transformer' is presently Not Available.
WinRadio does offer the LWA-0130 Long Wire Antenna Adapter
http://www.grove-ent.com/WR0130.html
http://www.winradio.com/home/lwa.htm
http://www.winradio.com/home/ax05e.htm
-by- WiNRADiO - - MSRP Price ~ $40
READ - Good Deal on 9:1 Matching Transformer
http://groups.google.com/group/rec.r...7e40978fdc32ac
0
-by- William Fieldstone
More WinRadio LWA-0130 Long Wire Antenna Adapter Postings
http://groups.google.com/group/rec.r...77d380609eec59
2
http://groups.yahoo.com/group/Shortw...na/message/230
iane ~ RHF
.
[D]iane,
The point is to keep the feedpoint Z below the transmission line Z.
What's the advantage of the feed-point Z being below the transmission
line Z?
OK I'll answer it. None.
Less pinching in the midriff...
There's a rule.


? OK here is the rule, when you have an impedance mismatch
? by some ratio it does not matter which system element is
? higher or lower so for example if the coax transmission
? line is 50 ohms and the antenna impedance is 25 or 75 ohms
? the result is the same amount of reflected power.
? 25 ohms and 75 ohms are equivalent in this regard.
? One is not a better situation than the other.

Telamon,

Wouldn't it be the Ratios :

25 Ù Antenna to 50 Ù Coax ~ 1 : 2

50 Ù Coax to 100 Ù Antenna ~ 1 : 2
-vice- 50 Ù Coax to 75 Ù Antenna ~ 2 : 3 (1 : 1.5)

~ RHF

- Take an extreme case of this where you have either a short
- or the coax is open with nothing connected on that end.
- In either case if you were to send RF power to the open
- or short end of the cable you would have 100% reflected
- power. The returned phase of the that power would be 90
- degrees different though.
-
- This is different situation then DC current where the open
- and short would have very different consequences.


Low goes into high better than high goes into low. Reflected power does
no harm in a receive antenna. Try using your 300 Ohm antenna with a 50
Ohm transmission line. Then try using a 50 Ohm antenna with a 300 Ohm
transmission line. Which will receive better?


Neither will be better. If you don't understand this look up VSWR and
study that topic.

Of course there is not enough power to hurt any part of a receive
antenna or transmission line but it harms your reception.

When it comes to RF all that matters is whether two components match and
if they don't how far apart they are in impedance. It does not matter
which is higher than the other; the results will be the same reflected
power. It's a simple rule that applies to many a physics problem not
just antennas and transmission lines such as light through a prism or
light passing from air to water.

--
Telamon
Ventura, California

David[_5_] December 25th 07 02:47 PM

The Verdict {One Man's Opinion} : Magnetic Longwire Balun IsToo Expensive
 
Telamon wrote:
In article ,
David wrote:

RHF wrote:
On Dec 23, 1:27 pm, Telamon
wrote:
In article ,





David wrote:
Telamon wrote:
In article
,
Telamon wrote:
In article ,
David wrote:
RHF wrote:
The Verdict {One Man's Opinion} : Magnetic Longwire Balun Is Too
Expensive
http://www.hard-core-dx.com/nordicdx.../magbalun.html
-by- Alan Johnson
-source- Hard-Cord-DX website :http://www.hard-core-dx.com/
The Most Common Antenna Type
Randon Wire Antenna Problems
Enter the Balun
The Magnetic Longwire Balun (MLB)
In the Laboratory
After Four Rainy WeekEnds
I also did A-B Comparisons
* The Results
The "Resistance" Curve for the MLB
The N8KDV Transformer
A-B Testing was very Revealing.
* Recommenation
How Essential is a Perfect Match?
Based on Price and Performance
The MLB Definitely Wins
Originally Published in the NASWA Journal - July 1992
-by- Alan Johnson [N4LUS]
Magnetic Longwire Balun (MLB)
http://www.universal-radio.com/catalog/sw_ant/1484.html
http://www.dolstra.nl/Z&L-amateur/AN...tems/MLB_1.JPG
http://www.remeeus.eu/english/hamradio/mlb.htm
http://ham.srsab.se/graphics/antennas/mlbII.jpg
-by- RF Systems - MSRP Price ~ $60
Alternative "MLB" - MLB-1 Magnetic Longwire Balun
http://www.palomar-engineers.com/MLB-1/mlb-1.html
-by- Palomar Engineers - MSRP Price ~ $50
NOTE - While the 'N8KDV Transformer' is presently Not Available.
WinRadio does offer the LWA-0130 Long Wire Antenna Adapter
http://www.grove-ent.com/WR0130.html
http://www.winradio.com/home/lwa.htm
http://www.winradio.com/home/ax05e.htm
-by- WiNRADiO - - MSRP Price ~ $40
READ - Good Deal on 9:1 Matching Transformer
http://groups.google.com/group/rec.r...7e40978fdc32ac
0
-by- William Fieldstone
More WinRadio LWA-0130 Long Wire Antenna Adapter Postings
http://groups.google.com/group/rec.r...77d380609eec59
2
http://groups.yahoo.com/group/Shortw...na/message/230
iane ~ RHF
.
[D]iane,
The point is to keep the feedpoint Z below the transmission line Z.
What's the advantage of the feed-point Z being below the transmission
line Z?
OK I'll answer it. None.
Less pinching in the midriff...
There's a rule.
? OK here is the rule, when you have an impedance mismatch
? by some ratio it does not matter which system element is
? higher or lower so for example if the coax transmission
? line is 50 ohms and the antenna impedance is 25 or 75 ohms
? the result is the same amount of reflected power.
? 25 ohms and 75 ohms are equivalent in this regard.
? One is not a better situation than the other.

Telamon,

Wouldn't it be the Ratios :

25 Ù Antenna to 50 Ù Coax ~ 1 : 2

50 Ù Coax to 100 Ù Antenna ~ 1 : 2
-vice- 50 Ù Coax to 75 Ù Antenna ~ 2 : 3 (1 : 1.5)

~ RHF

- Take an extreme case of this where you have either a short
- or the coax is open with nothing connected on that end.
- In either case if you were to send RF power to the open
- or short end of the cable you would have 100% reflected
- power. The returned phase of the that power would be 90
- degrees different though.
-
- This is different situation then DC current where the open
- and short would have very different consequences.

Low goes into high better than high goes into low. Reflected power does
no harm in a receive antenna. Try using your 300 Ohm antenna with a 50
Ohm transmission line. Then try using a 50 Ohm antenna with a 300 Ohm
transmission line. Which will receive better?


Neither will be better. If you don't understand this look up VSWR and
study that topic.

Of course there is not enough power to hurt any part of a receive
antenna or transmission line but it harms your reception.

When it comes to RF all that matters is whether two components match and
if they don't how far apart they are in impedance. It does not matter
which is higher than the other; the results will be the same reflected
power. It's a simple rule that applies to many a physics problem not
just antennas and transmission lines such as light through a prism or
light passing from air to water.


I am going by strictly anecdotal practical experience. If I am wrong,
so be it. My Palomar MLB works a lot better (ca. 20 s units) than
hooking a longwire directly to the center conductor of the cable. But
there is virtually no loss if I connect the other end of the cable to
the 500 Ohm input on the radio, rather than the 50 Ohm SO-239.

RHF December 25th 07 03:36 PM

The Verdict {One Man's Opinion} : Magnetic Longwire Balun Is TooExpensive
 
On Dec 25, 6:47*am, David wrote:
Telamon wrote:
In article ,
*David wrote:


RHF wrote:
On Dec 23, 1:27 pm, Telamon
wrote:
In article ,


*David wrote:
Telamon wrote:
In article
,
*Telamon wrote:
In article ,
*David wrote:
RHF wrote:
The Verdict {One Man's Opinion} : Magnetic Longwire Balun Is Too
Expensive
http://www.hard-core-dx.com/nordicdx.../magbalun.html
-by- Alan Johnson
-source- Hard-Cord-DX website :http://www.hard-core-dx.com/
The Most Common Antenna Type
Randon Wire Antenna Problems
Enter the Balun
The Magnetic Longwire Balun (MLB)
In the Laboratory
After Four Rainy WeekEnds
I also did A-B Comparisons
* The Results
The "Resistance" Curve for the MLB
The N8KDV Transformer
A-B Testing was very Revealing.
* Recommenation
How Essential is a Perfect Match?
Based on Price and Performance
The MLB Definitely Wins
Originally Published in the NASWA Journal - July 1992
-by- Alan Johnson [N4LUS]
Magnetic Longwire Balun (MLB)
http://www.universal-radio.com/catalog/sw_ant/1484.html
http://www.dolstra.nl/Z&L-amateur/AN...tems/MLB_1.JPG
http://www.remeeus.eu/english/hamradio/mlb.htm
http://ham.srsab.se/graphics/antennas/mlbII.jpg
-by- RF Systems - MSRP Price ~ $60
Alternative "MLB" - MLB-1 Magnetic Longwire Balun
http://www.palomar-engineers.com/MLB-1/mlb-1.html
-by- Palomar Engineers - MSRP Price ~ $50
NOTE - While the 'N8KDV Transformer' is presently Not Available.
WinRadio does offer the LWA-0130 Long Wire Antenna Adapter
http://www.grove-ent.com/WR0130.html
http://www.winradio.com/home/lwa.htm
http://www.winradio.com/home/ax05e.htm
-by- WiNRADiO - *- MSRP Price ~ $40
READ - Good Deal on 9:1 Matching Transformer
http://groups.google.com/group/rec.r...7e40978fdc32ac
0
-by- William Fieldstone
More WinRadio LWA-0130 Long Wire Antenna Adapter Postings
http://groups.google.com/group/rec.r...77d380609eec59
2
http://groups.yahoo.com/group/Shortw...na/message/230
iane ~ RHF
*.
[D]iane,
The point is to keep the feedpoint Z below the transmission line Z.
What's the advantage of the feed-point Z being below the transmission
line Z?
OK I'll answer it. None.
Less pinching in the midriff...
There's a rule.
? OK here is the rule, when you have an impedance mismatch
? by some ratio it does not matter which system element is
? higher or lower so for example if the coax transmission
? line is 50 ohms and the antenna impedance is 25 or 75 ohms
? the result is the same amount of reflected power.
? 25 ohms and 75 ohms are equivalent in this regard.
? One is not a better situation than the other.


Telamon,


Wouldn't it be the Ratios :


25 Ù Antenna to 50 Ù Coax ~ 1 : 2


50 Ù Coax to 100 Ù Antenna ~ 1 : 2
-vice- 50 Ù Coax to 75 Ù Antenna ~ 2 : 3 (1 : 1.5)


~ RHF


- Take an extreme case of this where you have either a short
- or the coax is open with nothing connected on that end.
- In either case if you were to send RF power to the open
- or short end of the cable you would have 100% reflected
- power. The returned phase of the that power would be 90
- degrees different though.
-
- This is different situation then DC current where the open
- and short would have very different consequences.


Low goes into high better than high goes into low. *Reflected power does
no harm in a receive antenna. *Try using your 300 Ohm antenna with a 50
Ohm transmission line. *Then try using a 50 Ohm antenna with a 300 Ohm
transmission line. *Which will receive better?


Neither will be better. If you don't understand this look up VSWR and
study that topic.


Of course there is not enough power to hurt any part of a receive
antenna or transmission line but it harms your reception.


When it comes to RF all that matters is whether two components match and
if they don't how far apart they are in impedance. It does not matter
which is higher than the other; the results will be the same reflected
power. It's a simple rule that applies to many a physics problem not
just antennas and transmission lines such as light through a prism or
light passing from air to water.


- I am going by strictly anecdotal practical experience. *
- If I am wrong, so be it. *

- My Palomar MLB works a lot better (ca. 20 s units) than
- hooking a longwire directly to the center conductor of the cable.

MLB-1 Magnetic Longwire Balun -by- Palomar Engineers
MLB-1 - http://www.palomar-engineers.com/MLB-1/mlb-1.html
-msrp- Price ~ $50

OK - That would be having the MLB Connected with the 9-Side-Wire
to the Antenna Wire and the 1-Side-SO-239 Jack to the Coax Cable;
with the Coax Cable 'Grounded' at the Receiver via the SO-239
50-Ohm Antenna Input.

-*But there is virtually no loss if I connect the other end of the
cable to
- the 500 Ohm input on the radio, rather than the 50 Ohm SO-239.

I can understand how you make the Coax Cable's Pl-259 Plug -to- the
Receiver's SO-239 Jack 'Connection'.

-But- How do you make the Coax Cable/PL-259 Plug -to- 500-Ohm
Terminals 'Connection' ?

i want to know -and- a merry christmas ~ RHF

David[_5_] December 26th 07 01:25 PM

The Verdict {One Man's Opinion} : Magnetic Longwire Balun IsToo Expensive
 
Telamon wrote:



Don't just take my word for it. Go look up VSWR and read just a few
paragraphs on the subject. You work in electronics, this is important
for you to understand.

Search for the term index of refraction for similar concepts in physics
for lightwaves, which are EM waves. Then you will get the idea behind
refraction of radio waves in the upper atmosphere. Short wave radio can
teach you a lot.


One condition is closer to a short circuit. That's all I know.

I always match impedance for maximum power transfer. I voltage match as
well, when power is not so important, e.g. signal sampling.

In practical usage, "receive only" is closer to sampling.

I know enough about electronics to keep my sorry ass employed.


All times are GMT +1. The time now is 05:16 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com