For One and All,

Anyone know the Specific Differences between the :

Stoner/Mckay Dymek Model DA-100"D" Active Antenna ?
http://cgi.ebay.com/_W0QQitemZ150214451176

- and the -

McKay Dymek DA-100"E" Active Antenna ?
http://www.universal-radio.com/catalog/sw_ant/0328.html

i want to know ~ RHF

RHF wrote:

For One and All,

Anyone know the Specific Differences between the :

Stoner/Mckay Dymek Model DA-100"D" Active Antenna ?
http://cgi.ebay.com/_W0QQitemZ150214451176

- and the -

McKay Dymek DA-100"E" Active Antenna ?
http://www.universal-radio.com/catalog/sw_ant/0328.html

i want to know ~ RHF
.
CAUTION : This Post Has Not Been "Approved" by Telamon.
-ps- So Read It Only -If- You Are "Clueless".
.

No but I have 6 model E's in service, and have replaced 2,
over a decade. (So that's 60 combined years, 2 failures, =
one failure every 30 years, which I guess is not bad.

One interesting flaw : ice forming and thawing eventually
lifts the antenna rod off the pinch-fit stub it's slipped
over, after several years. Application of heat to the rod
and ice to the stub can get it back on fairly easily.)

The E is more sensitive than a Wellbrook ALA1530 by a good deal,
though I suppose more susceptible to any local noise sources
as well.
--


On the internet, nobody knows you're a jerk.

On Feb 12, 3:17*am, RHF wrote:
For One and All,

Anyone know the Specific Differences between the :

- Stoner/Mckay Dymek Model DA-100"D" Active Antenna ?
- http://cgi.ebay.com/_W0QQitemZ150214451176

Two Power Sources :
* AC = 115 Volts or 230 Volts @ 4 Watts
* DC = 12 VDC
* DC - Off - AC Power Switch


- and the -

- McKay Dymek DA-100"E" Active Antenna *?
- http://www.universal-radio.com/catalog/sw_ant/0328.html

One Power Source : [External DC Only]
* DC = 12 VDC via an AC-to-DC Adapter {Wall-Wart}
* Off - DC Power Switch


i want to know ~ RHF
*.
CAUTION : This Post Has Not Been "Approved" by Telamon.
-ps- So Read It Only -If- You Are "Clueless".
*.