Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Grundig Satellit 500 - Help needed
Hello... I am hoping fellow owners of the Sat 500 might point me in the right direction. I have inherited a Grundig Satellit 500 in excellent cosmetic condition. It has been used regularly up 2 weeks ago. I had it my possession for a day, and it worked flawlessly.
However, it now has developed a problem. After a few seconds of normal reception and audio, whatever station I am listening to disappears completely - all I hear is white noise, as if there were no station on that frequency whatsoever. All bands are like this... I cannot tune any station on FM, MW, LW, or SW. It's as if there were no stations whatsoever. All the other dials and buttons operate normally in this condition... it's just that there are no stations. If I then turn the unit off for a short while, 10 minutes or so, the last tuned station returns for 2 or 3 seconds, then vanishes. If I leave the receiver turned off for 6 or more hours, the station will come back and play for 1 minute, but no more, and then all of the bands are dead again. Is this a problem anyone has heard of? It is very frustrating to deal with as I was excited to finally have a Grundig receiver in my possession. ] If anyone has any tips or tricks, please let me know! They would be most appreciated! Thanks in advance, OnkyoMan Last edited by OnkyoMan : March 17th 11 at 06:25 AM |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Grundig Satellit 750 | Shortwave | |||
grundig satellit 6001 - help needed | Shortwave | |||
FA GRUNDIG SATELLIT 500 | Shortwave | |||
NEW - Grundig Satellit 800 Millennium - WebPages on Grundig Radio . Com | Shortwave | |||
Grundig Satellit 3400 and Grundig Satellit 500 | Swap |