tommyknocker wrote:

Samantha Williams wrote:

Hi everyone, I reviewed the FAQ at
http://mysite.verizon.net/vze20h45/r...ml#disassemble

but am having a lot of trouble trying to get inside my
DX-398. I have removed the batteries, battery door, all
three control knobs, and all of the screws (one small screw
behind the antenna and 4 larger screws). The FAQ says to
apply pressure to the radio halves at the top and bottom. I
have been pressing as hard as I can, but no dice. What
direction should the pressure be in? Does anyone have any
hints to get the case released?

Thanks!


I'm not intimately familiar with the 398, but could you have missed a
screw, like one in the battery compartment?

I don't think so, I looked carefully and think I have all of the screws out. .
A faq said that there are four larger screws and a smaller one behind the
antenna, which I have accounted for. .. .
http://members.aol.com/rickw999/398_909M.txt

It's the plastic tab system which holds the radio together that is causing me
trouble.