| Home |
| Search |
| Today's Posts |
|
#6
|
|||
|
|||
|
"starman" wrote in message ... I noticed recently that I was receiving a new kind of noise/interference on certain shortwave frequency ranges. It seems to be an unmodulated carrier which repeats at 43-Khz intervals throughout a range of several hundred KHZ. It's most noticeable in/near the 25-m band from about 11200 to 12400, although I've found it at weaker levels in other frequency ranges. I got to thinking about the possible source of this interference and remembered that the local power company recently replaced my home electricity meter with a new remote reading digital meter. Is there any documentation on RF interference from these meters? -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- If you are in Europe then all new electrical equipment should be EM compliant and not generate interference. The meter should have a CE mark indicating amongst other things that it complies with the EMC directive. If the meter has a CE mark and is generating interference then it is faulty. If it does not it is probably illegal. In both cases the power company should replace it. If you are in the US then I don't know if there are any regulations on EM compliance. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| WTB: HP/Agilent 346A (or B) Noise Source for HP 8970A Noise Figure Meter | Homebrew | |||
| 160 Meter noise | Antenna | |||
| Automatic RF noise cancellation and audio noise measurement | Homebrew | |||
| CCIR Coefficients METHOD 6 REC533 // AUCKLAND --> SEATTLE | Shortwave | |||