Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
My DX-396 periodically resets itself, never while I'm using it. All the
memories are gone as well as the clock settings. It usually sits on top of a speaker in the living room, a large bookshelf speaker. Not being able to determine a cause, I have moved it away from the speaker. Surprisingly, it has not reset since it has been moved. I have tried tapping the unit to simulate vibrations, giving it a good smack or two, but no reset. Thermal considerations haven't really changed. Magnetic fields are the only things that would have changed. The speakers are unusual in that they have a 6" down firing woofer that radiates into a gap between the bottom of the main speaker housing and a sub plate that is actually in contact with the "shelf". I mention the point about the speakers is since the driver magnets are probably larger than most "bookshelf" speakers would have, and the orientation would place a larger percentage of the magnet in relation to the top of the speaker. This said, I don't see how magnetism would cause the radio to reset, but I haven't seen any problems since I have moved the radio away from the speaker. Has anybody heard of problems with the DX-396 and spontaneous resets? Merry Christmas to all. -- Never say never. Nothing is absolute. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Icom IC-R20 Programming Comments | Scanner | |||
Antenna Ground | Antenna | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna | |||
The two sorts of loss | Antenna |