![]() |
|
"Maximus" wrote in message news:IK2Kb.37528
"Maximus" wrote in message hlink.net... Hi. As a ham radio man, I am hoping you can help me out. I have a DX394 receiver and usually use ac to power it. I can run from a car battery, with the adaptor. It requires 12 volts at 500 Ma. What I am wondering is if I can build an emergency power supply so I can listen using batteries when the trees take out the power lines s. The DX-394 draws from 170 to 200 mA, not 500 mA, so any 12V battery capable of a few hundred mA-hours will be able to run it. The larger the ampere-hour capacity, the longer it will run without recharging. For lots of info on the DX-394, consider joining the group http://groups.yahoo.com/group/RADIOSHACKDX394/ (at the moment, Yahoo seems to have a serious problem and nothing can be found on the group website but it should be restored soon.) Tom |
I have a DX-394 that I converted to run off 8AA's or a wall wart
works great "Maximus" wrote in message thlink.net... Hi. As a ham radio man, I am hoping you can help me out. I have a DX394 receiver and usually use ac to power it. I can run from a car battery, with the adaptor. It requires 12 volts at 500 Ma. What I am wondering is if I can build an emergency power supply so I can listen using batteries when the trees take out the power lines s. What I thought I could do is get a 9v lantern battery and add two 1.5 volt D Cells . I am not mathematically inclined in the least. If I connect the positive of the lantern and the negative of the lantern to the corresponding terminals of the two D Cells, and connect all that to the adaptor plug for the back of the receiver, will it supply sufficient current to run properly or not ? I could probably get an actual car battery, but would rather not have that in the apartment. V Solidarity |
All times are GMT +1. The time now is 08:42 AM. |
|
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com