single IF, but "works as a dual conversion radio"
 

All:

Inquired about the kaito KA 105 to Kaito USA

http://www.kaitousa.com/KA105.htm

asked if it was single IF or double IF

Got the reply back:

"It is a single IF, but works as a dual conversion radio"

- Is this possible?

Dan

No


"Diverd4777" wrote in message
...
All:

Inquired about the kaito KA 105 to Kaito USA

http://www.kaitousa.com/KA105.htm

asked if it was single IF or double IF

Got the reply back:

"It is a single IF, but works as a dual conversion radio"

- Is this possible?

Dan

- Didn't think so...

Guess the sales rep was pullin my chain...

Dan
( Owner of a $12.00 Jwin , " Not Quite Junk"
" When The Going Gets Tough, It fades & Overloads",
JX M-14, Single IF Shortwave Radio)

In article , "Brian Hill"
brianehill@charterDOTnet writes:


No


"Diverd4777" wrote in message
...
All:

Inquired about the kaito KA 105 to Kaito USA

http://www.kaitousa.com/KA105.htm

asked if it was single IF or double IF

Got the reply back:

"It is a single IF, but works as a dual conversion radio"

- Is this possible?

Dan

Hi Dan and all interested parties.
I bought a KA105. I love it, but it's single conversion.
If you are referring to Walter Zhao, President of Kaito
.... I believe he meant 'it works as well as dual conversion'
That was his response to me when I asked the same
question. If someone else answered your question, they
might have mistranslated his response.
The radio had good sensitivity and so so selectivity,
but for a truly *shirt pocket* size digital tuning SW with
direct entry keypad it's awesome. I've had interference
from some minor stations "next door" to the
frequencies I was trying in the 41 M band, and imaging
3 k off the carrier on powerful broadcasters. Definitely
not as good as dual conversion.
I have had it running on two AA batteries on and off
for over 48 hours now (noting the times I listen to it),
and the low battery indicator hasn't shown up. I'll switch to
rechargeables after I finish testing battery life with 2 alkalines.
MW is good, or good enough for me... I get WOAI 1200 kHz in
San Antonio after dark... 960 miles straight line from me. Good
sound for the size, rivals or surpasses my old YB300PE.
FM stereo with the included earbuds is excellent too, with
good separation. Lots of features to like... lock slide button,
light button, sleep timer, a/c adaptor included, wire antenna included,
dual clocks (viewable only when radio is off) and don't forget
direct entry digital tuning!
Again, it is not dual conversion, and selectivity is fair.
But sensitify is excellent for the size and price. I recommend
it if you want a SW you can really carry in your shirt pocket.
P.S. I wasn't thrilled with the strap/tab thing that acts as a
"flip stand". It works... if you don't pick up the radio after
setting on the "stand". If you do, the tab thing drops out and you have to
reposition it.. I ordered the small plastic radio stand from
Universal.


"Diverd4777" wrote in message
...
All:

Inquired about the kaito KA 105 to Kaito USA

http://www.kaitousa.com/KA105.htm

asked if it was single IF or double IF

Got the reply back:

"It is a single IF, but works as a dual conversion radio"

- Is this possible?

Dan

(Diverd4777) wrote in message ...
All:

Inquired about the kaito KA 105 to Kaito USA

http://www.kaitousa.com/KA105.htm

asked if it was single IF or double IF

Got the reply back:

"It is a single IF, but works as a dual conversion radio"

- Is this possible?

Dan

It might "work as a dual conversion" if they used the 10.7 mhz FM IF
transformers as the sw if. I had a Sony once that used that scheme
and it was quite free of images. It would be worth looking into.

"ken" wrote in message
m...
(Diverd4777) wrote in message
...
All:

Inquired about the kaito KA 105 to Kaito USA

http://www.kaitousa.com/KA105.htm

asked if it was single IF or double IF

Got the reply back:

"It is a single IF, but works as a dual conversion radio"

- Is this possible?

Dan

It might "work as a dual conversion" if they used the 10.7 mhz FM IF
transformers as the sw if. I had a Sony once that used that scheme
and it was quite free of images. It would be worth looking into.

Living in the orient gives one a different perspective on these things.
Orientals tend to do literal translations into other languages. In this
case, 'as' most likely means 'like', that's the way it's written in a lot of
stuff over here.

On 14 Jan 2004 19:17:17 GMT, (Diverd4777) wrote:

All:

Inquired about the kaito KA 105 to Kaito USA

http://www.kaitousa.com/KA105.htm

asked if it was single IF or double IF

Got the reply back:

"It is a single IF, but works as a dual conversion radio"

- Is this possible?

It may a single IF AMP stage. You may not have asked the question
clearly enough. I.E. Not single IF or double IF, but instead ask what
the IF frequencies are. Often enough gain can be produced in a single
IF amp stage behind the RF amplifier, that you only have a mixer for
the second IF frequency, and from their it goes straight to a
detector.
Dan

On Wed, 14 Jan 2004 16:55:19 -0600, Sanjaya wrote
(in message et):

I ordered the small plastic radio stand from
Universal.

It's been months since someone mentioned the stands from Universal (I've got
several and have had for 5/6 (or so) years.

You wanna give the sales pitch (I don't have the info unpacked yet)?

Thanks,

/Gray/

It might "work as a dual conversion" if they used the 10.7 mhz FM IF
transformers as the sw if.

I kind of think that's what goes on inside my Grundig eTraveller VII.

Bill, K5BY

"Diverd4777" wrote in message
...
All:

Inquired about the kaito KA 105 to Kaito USA

http://www.kaitousa.com/KA105.htm

asked if it was single IF or double IF

Got the reply back:

"It is a single IF, but works as a dual conversion radio"

- Is this possible?

Dan





They might meant "Works as well as a dual conversion radio". That's
possible, if they're compairng a poor dual conversion radio to a good
single conversion one. Dual conversion describes a circuit, not a
desirable performance specification such as adjacent channel
selectivity, image rejection or signal to noise ratio. Back in the
dinosaur radio days, they tried to improve the image rejection of single
conversion radios with more high Q RF sections. That worked but it got
much more expensive with increasing frequency. Double conversion proved
to be the cheaper way.

It seems very unlikely an inexpensive single conversion radio will have
more selectivity or a better image rejection ratio than an inexpensive
double conversion radio. It might have fewer birdies or a lower noise
floor, however.

Frank Dresser

ken schrieb:

It might "work as a dual conversion" if they used the 10.7 mhz FM IF
transformers as the sw if. I had a Sony once that used that scheme
and it was quite free of images. It would be worth looking into.

BTW, the common IF for SW and FM was apparently dropped in the early
'80s - more current Sonys that use 10.7 MHz as 1st SW IF (like the
ICF-7601 or ICF-SW35) have entirely separate SW and FM IF stages. The
mixing concept varies between analog and digital models - analogs like
the ICF-7601 use fixed 1st mixing frequencies (one per band) and then
tune through the frequencies around 10.7 MHz (2nd mixing frequency is
variable). Digitals like the ICF-SW35 vary the 1st mixing frequency
instead.

Stephan
--
Home: http://stephan.win31.de/ | Webm.: http://www.i24.com/
PC#6: i440BX, 2xCel300A, 512 MiB, 18 GB, ATI AGP 32 MiB, 110W
This is a SCSI-inside, Legacy-plus, TCPA-free computer :)
Reply to newsgroup only. | See home page for working e-mail address.

I looked at their web sites, and some of their other radios
are listed as specifically being double conversion.

So if you ask them if the KA105 is double conversion,
any answer other than "no" is deliberately deceptive,
in my opinion. They clearly know what the difference
is between single and double conversion.

--
B. Z. Lederman Personal Opinions Only

Posting to a News group does NOT give anyone permission
to send me advertising by E-mail or put me on a mailing
list of any kind.

Please remove the "DISABLE-JUNK-EMAIL" if you have a
legitimate reason to E-mail a response to this post.