How many of you actually *use* the memories in your receiver?
 

I don't. Not really. Honestly, while I'm happy that that Radio Australia
International is so clear, it's just another catch for me, something for my
log book. I hear it every night, and I'm always looking for the odd catch,
not the regular one.

I think I've got 5 memories filled on my RX-320, zero on my S700, and none
on my Sangean ATS-909, apart from the manufacturer ones.

I only use memories when I'm hunting numbers stations- I can program a bunch
in for the next hour and rapid fire between them, but then they get
discarded after that's done with.

On my VR5000, none of the 2000 memories are being used. On my R75, I have
filled up about 3o of the memories with different frequencies that I've
caught number stations on. Other than that, only my scanners have stuff in
memory...



"Jeff Wilson" wrote in message
. com...
I don't. Not really. Honestly, while I'm happy that that Radio Australia
International is so clear, it's just another catch for me, something for
my
log book. I hear it every night, and I'm always looking for the odd catch,
not the regular one.

I think I've got 5 memories filled on my RX-320, zero on my S700, and none
on my Sangean ATS-909, apart from the manufacturer ones.

I only use memories when I'm hunting numbers stations- I can program a
bunch
in for the next hour and rapid fire between them, but then they get
discarded after that's done with.

I have a Sangean 606A and an Icom R-75;
I use the memories all the time;
- saves time, keeps things orderly , and if yo put it in memory, six months
later it's
still there!

Dan

In article , "Jeff Wilson"
writes:


I don't. Not really. Honestly, while I'm happy that that Radio Australia
International is so clear, it's just another catch for me, something for my
log book. I hear it every night, and I'm always looking for the odd catch,
not the regular one.

I think I've got 5 memories filled on my RX-320, zero on my S700, and none
on my Sangean ATS-909, apart from the manufacturer ones.

I only use memories when I'm hunting numbers stations- I can program a bunch
in for the next hour and rapid fire between them, but then they get
discarded after that's done with.

Don't use 'em here at the moment, did have a few entered into the R8 years ago.

Steve
Holland, MI
Drake R7, R8 and R8B

http://www.iserv.net/~n8kdv/dxpage.htm

Jeff Wilson wrote:

I don't. Not really. Honestly, while I'm happy that that Radio Australia
International is so clear, it's just another catch for me, something for my
log book. I hear it every night, and I'm always looking for the odd catch,
not the regular one.

I think I've got 5 memories filled on my RX-320, zero on my S700, and none
on my Sangean ATS-909, apart from the manufacturer ones.

I only use memories when I'm hunting numbers stations- I can program a bunch
in for the next hour and rapid fire between them, but then they get
discarded after that's done with.

On Fri, 30 Jan 2004 07:52:52 +0000, Jeff Wilson wrote:

I don't. Not really. ...

I use the memories as much as or more often than the VFO.

The memories contain frequencies for both utility
stations (military, ICAO aircraft, USCG, etc.) and
AM broadcasters.

I don't often monitor foreign broadcasters.
--
================================================== =======================
Bob Parnass, AJ9S GNU/Linux User http://parnass.com

It's harder to work with them then to just load the freq.

I could get by pretty well with write only memories.

I'm much more likely to store something than to recall it.

I use them, but it depends on the radio. On the ATS-909 I have everything I
want saved and organized, of course it's my oldest radio. On the Sat 800 I
only have things I listen to every day saved.

The thing which makes me reply to this thread is the SW77, at first glance,
the memory/timer setup seems confusing at best, but once I wrapped my mind
around it, I really started using those memories, and with a little time
spent programming them smartly, it does save a little time, esp when I'm
swinging my sleepy hand over there in the middle of the night to change the
freq. My wife is also accustomed to using the memories now, and she acts
like she doesn't want to push any of the other buttons.

But I'll admit I'm not using the timer function much in the SW77.. That
radio can be programmed to be more or less automated in it's operation..
While I like the memory/timer setup now that I understand it, it does seem a
bit like overkill. As opposed to the SAT-800 which is very simplistic about
memory. The ATS-909 has an excellent memory setup which makes sense from
moment 1. The ATS-909 memory holds so many it can be used as a freq
notepad.


"Jeff Wilson" wrote in message
. com...
I don't. Not really. Honestly, while I'm happy that that Radio Australia
International is so clear, it's just another catch for me, something for
my
log book. I hear it every night, and I'm always looking for the odd catch,
not the regular one.

I think I've got 5 memories filled on my RX-320, zero on my S700, and none
on my Sangean ATS-909, apart from the manufacturer ones.

I only use memories when I'm hunting numbers stations- I can program a
bunch
in for the next hour and rapid fire between them, but then they get
discarded after that's done with.

The only thing I've stored in my ICF-SW7600G's memories are the local FM
stations. Gave up saving SW freqs long ago after recognising that the rx
had waaay too little of 'em. On the AR7030, I don't use the memories at
all (I might if I were using it more). I'm more the band scanning type,
you know... (What is useful in this regard is the ability to jump
directly to popular bands, something that would also be useful on "real
receivers".)

Stephan
--
Meine Andere Seite: http://stephan.win31.de/
PC#6: i440BX, 2xCel300A, 512 MiB, 18+80 GB, ATI AGP 32 MiB, 110W
This is a SCSI-inside, Legacy-plus, TCPA-free computer :)
Reply to newsgroup only. | See home page for working e-mail address.

"Jeff Wilson" wrote in message .com...
I don't. Not really. Honestly, while I'm happy that that Radio Australia
International is so clear, it's just another catch for me, something for my
log book. I hear it every night, and I'm always looking for the odd catch,
not the regular one.

I think I've got 5 memories filled on my RX-320, zero on my S700, and none
on my Sangean ATS-909, apart from the manufacturer ones.

I only use memories when I'm hunting numbers stations- I can program a bunch
in for the next hour and rapid fire between them, but then they get
discarded after that's done with.

I use every single one in my 706mk2g. I think it's got maybe 108
total?? counting the 6 scan/band edge memories..I'd have to double
check.
I use the first few as instant bandswitch memories in order. IE: #1
160m, fav freq, #2 80m, fave freq, and on up the spectrum to 10m. That
way I can jump ham bands real fast and land on my usual first likely
freq. As the M's are tunable, each is like a seperate VFO until you
reset it. Then I have an area for 2m and 70cm repeaters, and simplex.
Then all the WWV's in order. Then some HF aircraft. Then some misc HF
BC, one AM-BC, and one FM-BC setting. Then one for the noaa wx on
162.40. Then some ACARS freq's, then many of the local VHF air freq's.
Then in the last banks, I have all the local 460 mhz police with alpha
numeric labels programmed so I can keep track of what channel it is.
Then fire, ambulance. Then the six scan M's, which are used mainly to
set up band edges for scan modes, etc..I could use 200 more....I
filled up all of mine the first 48 hours I had the radio. I also have
a separate 10 mem scratchpad memory. I don't use it too much. I think
it's loaded with a few AM-BC freq's at the moment...One thing I can
do, but haven't yet, is to store whole 100 mem banks on the puter as
txt files and upload to the radio. I could have whole complete sets
that vary to the use, and could be quickly replaced. IE: I could have
them all SWL, or all aircraft, or all whatever...Get tired of one,
upload a new one. This is easily done if you have the ci-v interface
and the software. I have the software, but haven't built the ci-v
thing yet.. It's pretty simple though.. MK

Burr wrote in message link.net...
It's harder to work with them then to just load the freq.



I'm a hunt-and-pecker myself, but I do see the beauty in the 2010's
one button-push design for program listening. The 2010 also permits
you to enter FM, AM broadcast, SW, LW, and AIR frequencies into its 32
presets in any combination you desire. I must also say that the
pre-programmability of the Sangean 909/RS DX-398 page system is also
very well thought out.

Regards,

Grumpus

Burr wrote in message link.net...
It's harder to work with them then to just load the freq.

I am just a bandscanner....

JW,

Memories were a point of discussion on the Grundig Satellit 900
'eton e1 xm' radio eGroup at YAHOO !

1700 Menories were Not enough for some posters who wanted the
Memo-Chips that were used in the Grundig Satellit 700.
http://groups.yahoo.com/group/Grundi...00/message/623

My basic responce was after about 125 memories I get Lost and
have to go to my Programmed Memory Log Sheets in a Binder to
locate a specific Memory Number (M#) for a Programmed Frequency.
http://groups.yahoo.com/group/Grundi...00/message/619

NOTE: I have Programmed Memory Log Sheets Binders for:
* Kenwood R-5000 (R5000 :o) [ 2 Each ]
* Icom IC-R75 (R-75 :o)
* Sony ICF-2010
* Drake SW1 (SW-1 :o)
* Sangean ATS-909
* Grundig Satellit 800-M
* Grundig Yacht Boy 500
* Grundig Yacht Boy 400-PE
Nothing Fancy simply Hand Written : Fill-In-the-Blanks Sheets.
[ Memory Number (M#) : Frequency : Station ID : Times ]
PLUS: In the Binder is a Sheet "How To" Program and Erase the
Memories for that that Radio.

My Tuning-In-and-Listening is ruffly:
* Just Dialing Around = 50%
* Punching In The Numbers = 25%
* Using the Memories = 25%


jm2cw ~ RHF
..
..
= = = "Jeff Wilson"
= = = wrote in message .com...
I don't. Not really. Honestly, while I'm happy that that Radio Australia
International is so clear, it's just another catch for me, something for my
log book. I hear it every night, and I'm always looking for the odd catch,
not the regular one.

I think I've got 5 memories filled on my RX-320, zero on my S700, and none
on my Sangean ATS-909, apart from the manufacturer ones.

I only use memories when I'm hunting numbers stations- I can program a bunch
in for the next hour and rapid fire between them, but then they get
discarded after that's done with.

Stephan Grossklass wrote:

The only thing I've stored in my ICF-SW7600G's memories are the local FM
stations. Gave up saving SW freqs long ago after recognising that the rx
had waaay too little of 'em. On the AR7030, I don't use the memories at
all (I might if I were using it more). I'm more the band scanning type,
you know... (What is useful in this regard is the ability to jump
directly to popular bands, something that would also be useful on "real
receivers".)

Stephan




On the rare occasion I use memories, it is like a short-term
"bookmark" - following one particular frequency for a few days, maybe.
Other than that, I've never used them on any receiver I've owned.

Tony


----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeed.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =---

I labelled a page in my ATS-909 "KOOKS" and found that one page wasn't
enough ;^)

Seriously, the way I listen to radio is to punch quickly through my
favorites, and if nothing's interesting, start scanning. I use them every
day.

-- Stinger

"Jeff Wilson" wrote in message
. com...
I don't. Not really. Honestly, while I'm happy that that Radio Australia
International is so clear, it's just another catch for me, something for
my
log book. I hear it every night, and I'm always looking for the odd catch,
not the regular one.

I think I've got 5 memories filled on my RX-320, zero on my S700, and none
on my Sangean ATS-909, apart from the manufacturer ones.

I only use memories when I'm hunting numbers stations- I can program a
bunch
in for the next hour and rapid fire between them, but then they get
discarded after that's done with.

"Jeff Wilson" wrote in message
. com...
I don't. Not really. Honestly, while I'm happy that that Radio Australia
International is so clear, it's just another catch for me, something for
my
log book. I hear it every night, and I'm always looking for the odd catch,
not the regular one.

I think I've got 5 memories filled on my RX-320, zero on my S700, and none
on my Sangean ATS-909, apart from the manufacturer ones.

I only use memories when I'm hunting numbers stations- I can program a
bunch
in for the next hour and rapid fire between them, but then they get
discarded after that's done with.

I can't remember to use my memories.

I've never had much use for the memories in a shortwave receiver, at
least not for shortwave stations. I prefer to band-scan or check a
schedule for a particular country. I do use many of the memories in my
Sony-2010 for VHF aircraft frequencies.


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

"Jeff Wilson" wrote in message
. com...

I don't. Not really.

I have more memory than I know what to do with, but since I never use it
anyway, it's no big deal.


Craig, WPE1HNS
Meredith, NH USA

Drake R8B/Alpha Delta DX Sloper
Sony SW-77
Sony ICF-2010
2 x Phillips/Magnavox D2935
Uniden CR-2021
Knight Kit Star Roamer (permanently tuned to Turkey on 9460)
GE Superadio II/Select-A-Tenna
Delphi Ski-Fi XM/3" Antennae

Tuning since 1963