Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
"Bob Myers" wrote in message ... "Dave" wrote in message ... One manufacturer of a similar "wind-up" antenna adds a capacitor to the wire in order to lower the resonance frequency of the wire. If I were going to try something similar (adding a capacitor, in series) in an attempt to bring the resonance of the wire down into the 30 MHz range, what size (roughly) capacitor should I use? Should I just try a few with different ranges, or does anyone here have any suggestions? This isn't likely to help your basic problem, which appears to be a lack of selectivity in the radio (in other words, it is accepting signals over too wide a bandwidth, so you hear not only the station you're interested in, but those "to either side" as well. Having the passband too wide also makes for more noise in general. There are filters that can be added (within the receiver) to improve this, but your best bet may be to simply look for a better receiver. Bob M. Hello Bob, The selectivity doesn't actually seem to be too bad, as it is only the weaker signals that I have trouble digging out of the hash and trash. It does seem to be picking up some out-of-band signals, but they are very, very weak. As I posted in another message, a 100 microhenry RF choke cut that stuff out considerably, and I am planning on adding another 100 or 200 microhenry RF choke to see if that helps make the slightly stronger signals a little more discernable. Next on the worksheet is an antenna tuner of some sort. Thanks all, Dave |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Antenna feed wire question | Antenna | |||
Long Wire Antenna Question | Shortwave | |||
Long Wire Antenna Question | Shortwave | |||
Long Wire Antenna Question | Shortwave | |||
Balun | Shortwave |