RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Shortwave (https://www.radiobanter.com/shortwave/)
-   -   No Replies to my DX398 RCA dilema? (https://www.radiobanter.com/shortwave/42580-no-replies-my-dx398-rca-dilema.html)

GO BEARCATS May 15th 04 01:03 AM

Shack has an adapter whihc plugs into an RCA jack and
takes an F connector. To that Shack has an adapter that plugs into the F
female
on the above adapter and takes a BNC connector.


I don't know Bill. I suppose not, you'll see from my other posts on this that I
got something that makes it work, but it isn't like my original setup.

Guess I'll have to settle for this, but like I said, no one see it anyhow-it's
on the back but disconnecting it at night when I'm done won't be as easy as my
other 'sleeve' I had for the original 1/8 external antenna jack on the side of
the 398/909. :-(

Looks like a BIG storm is brewing up here.:-I

~^Monitoring The Spectrum^~
Hammarlund HQ129X /Heathkit Q Multiplier
Hammarlund HQ140X
Multiple GE P-780's(GREAT BCB Radios)
RCA Victor *Strato- World*
RCA Victor RJC77W-K(Walnut Grain)
1942 Zenith Wave Magnet 6G 601M
Cathedral/ Ross#2311/Rhapsody-MultiBand
DX100/394/*SUPER*398/399/402
OMGS Transistor Eight/Realistic 12-1451
Henry Kloss Model One/Bell+Howell
~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*
Alpha Delta DX Sloper 57ft.
500ft. 12AWG. (non-terminated)
120ft. 12 AWG Long-Wire
2 Radio Shack Loop Antennas
Radio Shack Amplified Antenna
30X30 DiamondLoop(six section 830pf Cap)
* Diamond Loop mounted to Lazy Susan TurnTable*
*21/2X2ft.FiveSpoked~Penta-Loop~PancakeLoop*


Mark Zenier May 15th 04 06:00 PM

(GO BEARCATS) wrote in message ...
Use a stero plug with the ring terminal not connected to anything on
your antenna.


Mark,
You're saying simply a 1/8" stereo plug to use soldering onto the end of my
long wire?

What difference would that make now, in that it's working fine and all?



Huh? I guess I missed something.


I'm trying to remember what happened at the shack the day I went up there and
asked them for that, they didn't have it or something-or the guy gave me the
package and I didn't look.

Matter of fact, it had two of em' in the pack and I stapled it closed after I
used the one, this is what's on the end of my long wire now cat#274-288A Two
Conductor 1/8" shielded phone plugs.

That is 'exactly' what it says on the package, so I asked for stereo (the right
one) and nit knowing what it'd look like I trusted the guy I suppose, it's been
a while.

You're saying this is a 'mono' plug? I'll call the shack now and give them the
cat# and ask them or type it in their website, but it doesn't say stereo OR
mono on it. {?]


Yes, it's a mono plug and if you are still using the 274-387 adapter,
that plug will short out the circuit.

It has the tip, then just a tad of space then a black circle on it, if that
helps identify it. I'll look at the pic of the one link of the proper one and
compare it to this one I have here.


There are two fixes.

1. Replace the 274-387 RCA to 1/8 stero phone with a 274-326 RCA to
1/8 MONO adapter.

Or.
2. Use a 274-284 STEREO plug. It has two insulators/black cicles, with
the metal segment in between called the "ring", (The other two parts are
called the tip and the sleeve (or ground)).

I'd go for fix 1, no soldering required, and you don't have to figure out
which one of the three terminals you solder your antenna to.

Mark Zenier



All times are GMT +1. The time now is 09:11 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com