LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #7   Report Post  
Old June 17th 04, 06:02 PM
Mark Zenier
 
Posts: n/a
Default

In article ,
Brenda Ann Dyer wrote:

"m II" wrote in message
news:lS9Ac.48479$Ds.19843@clgrps12...
Dave Holford wrote:

I recently purchased a pack of the small screw-in fluorescent bulbs and
the package contained a statement to the effect that although they had
been approved by the FCC they may cause interference to radios, wireless
networks, remote controllers etc.

A quick check with a portable HF receiver disclosed that they do indeed
radiate wide spectrum noise, although at a low enough level that I have
not noticed a problem when using an outdoor antenna with co-ax feed.


Some years ago there were rules concerning the use of dimmers near
radio telescopes because of the noise. All this stuff is accumulative.

How can any device that causes interference be type approved by UL
or the CSA? There may be some monetary incentives going on that we
aren't aware of.



I can't speak for CSA, but UL doesn't cover RF radiation, only safety issues
and other concerns of insurance companies.

As for the RF noise, FCC Part 15 applies to all such devices. Part 15 rules
allow for really quite a bit of RF garbage (100mW on AMBCB can create quite
a havoc, especially when it's connected to a nice long antenna like your
electrical wiring). I believe all the small fluorescent stuff uses a
switching power supply, similar in function to the one in your computer.
This means square waves.. and square waves mean beaucoup RF radiation up to
who knows how far in the spectrum.


I purchased some GE brand compact fluorescents recently and on the card
in the packaging has a warning.

.... "This product complies with Part 18 of the FCC Rules but may
cause interference to radios, televisions, wireless telephones, and
remote controls. Avoid placing this product near these devices.
If interference occurs, move product away from the device or
plug either into a different outlet. Do not install this product
near maritime safety equipment or other critical navigation or
communications equipment operating between .45 - 30 MHz. ..."

Part 18 is Industrial/Scientific/Medical regs, ie. microwave ovens,
induction stove burners, etc.

Mark Zenier Washington State resident

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Using a Pool Cage As an Antenna? W9zr Antenna 1 November 5th 04 04:18 AM
Faraday Cage Grounded Or Ungrounded AC/DC Shortwave 8 June 18th 04 06:02 AM
Building a Faraday Cage B Williams Shortwave 1 April 20th 04 07:15 AM
hints for quasi-professional cage antenna anyone? SpamLover Antenna 24 November 5th 03 12:09 AM
hints for quasi-professional cage antenna anyone? SpamLover Shortwave 18 November 2nd 03 02:31 AM


All times are GMT +1. The time now is 09:59 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017