LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #3   Report Post  
Old September 27th 04, 12:17 AM
Richard Clark
 
Posts: n/a
Default

On 26 Sep 2004 14:55:49 -0700, (TheGnome)
wrote:

I
managed to get 75 feet of #26 magnet wire on a perpendicular roof to
my window of my dorm room, and two runs of 15' speaker wire as a
counterpoise in my room. I'm getting a really bad noise problem


Hi OM,

Use coax out 25-30 of those 75 feet. At the far end, put your
counterpoise there and thus move your input to a position remote from
that same noise (presumably in your room). At that same far end, add
a 1:1 BalUn or W2DU style otherwise known as a Current BalUn rather
than a Voltage BalUn (the distinction in this regard is important).
This will keep noise from coupling to the outside of your coax and
funneling into the feedpoint (as long as your receiver has good
shielding). It is called "choking." This will help with radiative,
local noise. You can add a second BalUn on the antenna/counterpoise
side for Z transformation, if you choose.

If the noise is conductive, then it is coming in through your power
supply (AC is carrying trash). Good ground can help solve this,
unless you are in a room on a high floor. You can confirm conductive
noise by breaking all AC and ground paths and running on battery power
(if this is an option) or connecting your antenna to a battery powered
receiver. Another option (if no battery options are available) is to
get a long extension cord and try another outlet that you can identify
as being on a separate breaker (this may not be easy in a dorm
situation). With this, you may find a quiet AC branch that is not
shared with the noise generators.

73's
Richard Clark, KB7QHC
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted V Noise Problem Warren Bowery Antenna 9 November 29th 04 01:19 AM
Transformer for longwire antennas to reduce noise problem? [email protected] Antenna 8 September 29th 04 05:43 AM
s9 noise problem related to position of antenna tuner? tedoboxer Antenna 5 March 1st 04 02:02 PM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Antenna 16 December 13th 03 03:01 PM
signal to noise ratio drops on connecting the antenna Ashhar Farhan Homebrew 6 September 22nd 03 10:54 PM


All times are GMT +1. The time now is 05:17 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017