According to Par Electronic's website, this antenna is made from "a
tough polyethylene jacketed genuine Flex Weave (168 strands #36 woven
copper)."

Will its consisting of 168 strands of wire help (or hurt) its
performance? Or will this simply make it more flexible and easier to
work with?

Steve

= = = (Steve) wrote in message
= = = . com...
According to Par Electronic's website, this antenna is made from "a
tough polyethylene jacketed genuine Flex Weave (168 strands #36 woven
copper)."

Will its consisting of 168 strands of wire help (or hurt) its
performance? Or will this simply make it more flexible and easier to
work with?

Steve

STEVE,

Read about "Flex Weave" a 'specialty' Wire for Antennas.

http://www.davisrf.com/ham1/flexweve.htm

AWG #14 Antenna Wire is made-up of:
- 168 Strands of #36 Copper Wire.
- Each individual Wire Strand is coated / insulated.
- 24 Strands are 'bundled' into a Cord.
- Seven Cords are Twisted (Rope Like) into a Wire Bundle.
- Very Flexible and Strong.
- Litz Wire like RF Electrical Properties.
http://home.earthlink.net/~jimlux/hv/litz.htm

FLEX-WEAVE-DRAWING= http://www.radiobooks.com/products/fw.htm

iane ~ RHF
..

RHF wrote:

= = = (Steve) wrote in message
= = = . com...
According to Par Electronic's website, this antenna is made from "a
tough polyethylene jacketed genuine Flex Weave (168 strands #36 woven
copper)."

Will its consisting of 168 strands of wire help (or hurt) its
performance? Or will this simply make it more flexible and easier to
work with?

Steve

STEVE,

Read about "Flex Weave" a 'specialty' Wire for Antennas.

http://www.davisrf.com/ham1/flexweve.htm

AWG #14 Antenna Wire is made-up of:
- 168 Strands of #36 Copper Wire.
- Each individual Wire Strand is coated / insulated.
- 24 Strands are 'bundled' into a Cord.
- Seven Cords are Twisted (Rope Like) into a Wire Bundle.
- Very Flexible and Strong.
- Litz Wire like RF Electrical Properties.
http://home.earthlink.net/~jimlux/hv/litz.htm

FLEX-WEAVE-DRAWING= http://www.radiobooks.com/products/fw.htm

iane ~ RHF
.

I just use good 'ol #10 pvc clad electrical wire here. Had this system up for 3
years now and no problems.

dxAce
Michigan
USA

http://www.iserv.net/~n8kdv/dxpage.htm

= = = dxAce wrote in message
= = = ...
RHF wrote:

= = = (Steve) wrote in message
= = = . com...
According to Par Electronic's website, this antenna is made from "a
tough polyethylene jacketed genuine Flex Weave (168 strands #36 woven
copper)."

Will its consisting of 168 strands of wire help (or hurt) its
performance? Or will this simply make it more flexible and easier to
work with?

Steve

STEVE,

Read about "Flex Weave" a 'specialty' Wire for Antennas.

http://www.davisrf.com/ham1/flexweve.htm

AWG #14 Antenna Wire is made-up of:
- 168 Strands of #36 Copper Wire.
- Each individual Wire Strand is coated / insulated.
- 24 Strands are 'bundled' into a Cord.
- Seven Cords are Twisted (Rope Like) into a Wire Bundle.
- Very Flexible and Strong.
- Litz Wire like RF Electrical Properties.
http://home.earthlink.net/~jimlux/hv/litz.htm

FLEX-WEAVE-DRAWING= http://www.radiobooks.com/products/fw.htm

iane ~ RHF
.

I just use good 'ol #10 pvc clad electrical wire here.
Had this system up for 3 years now and no problems.

dxAce
Michigan
USA

http://www.iserv.net/~n8kdv/dxpage.htm


DX ACE,

Yes I have used #14 AWG made of 19 Strands of Copper Wire with
15 Mils Insulation THWN-2 or THHN; it works very well and lasts
a long time (5+ years). It can be bought at Home Depot, Lowes,
ACE Hardware, ETC in 500 Foot Roles with your choice of Colors;
usually Red, Black, White, or Green. Very cost effective for
a number of Wire Antenna Projects.

~ RHF
..
..

RHF wrote:

= = = dxAce wrote in message
= = = ...
RHF wrote:

= = = (Steve) wrote in message
= = = . com...
According to Par Electronic's website, this antenna is made from "a
tough polyethylene jacketed genuine Flex Weave (168 strands #36 woven
copper)."

Will its consisting of 168 strands of wire help (or hurt) its
performance? Or will this simply make it more flexible and easier to
work with?

Steve

STEVE,

Read about "Flex Weave" a 'specialty' Wire for Antennas.

http://www.davisrf.com/ham1/flexweve.htm

AWG #14 Antenna Wire is made-up of:
- 168 Strands of #36 Copper Wire.
- Each individual Wire Strand is coated / insulated.
- 24 Strands are 'bundled' into a Cord.
- Seven Cords are Twisted (Rope Like) into a Wire Bundle.
- Very Flexible and Strong.
- Litz Wire like RF Electrical Properties.
http://home.earthlink.net/~jimlux/hv/litz.htm

FLEX-WEAVE-DRAWING= http://www.radiobooks.com/products/fw.htm

iane ~ RHF
.

I just use good 'ol #10 pvc clad electrical wire here.
Had this system up for 3 years now and no problems.

dxAce
Michigan
USA

http://www.iserv.net/~n8kdv/dxpage.htm

DX ACE,

Yes I have used #14 AWG made of 19 Strands of Copper Wire with
15 Mils Insulation THWN-2 or THHN; it works very well and lasts
a long time (5+ years). It can be bought at Home Depot, Lowes,
ACE Hardware, ETC in 500 Foot Roles with your choice of Colors;
usually Red, Black, White, or Green. Very cost effective for
a number of Wire Antenna Projects.

Yeah, went and checked to see what I have here and it's #10 THWN-2. It does have
a tendency to lose it's outer clear shield out in the sun... It sheds... I have
a few pieces of the clear coating hanging down at this very moment.

I found a very large spool of this stuff alongside the road a few years ago...
I'm guessing it fell off a truck.

Never pass up free wire.

dxAce
Michigan
USA