Question about repair on Sony ICF–SW7600G.
Subject: Question about repair on Sony ICF–SW7600G.
The radio needs an antenna, and the back panel of the set (the screw hole at the base of where the antenna would be) has lost some plastic. There is also a small crack in the area of the screw hole. I live in Maine, and would like to have this patched up with a new antenna, and a new back panel if possible. |
On Sun, 24 Oct 2004 03:40:11 GMT, CCE wrote:
Subject: Question about repair on Sony ICF–SW7600G. The radio needs an antenna, and the back panel of the set (the screw hole at the base of where the antenna would be) has lost some plastic. There is also a small crack in the area of the screw hole. I live in Maine, and would like to have this patched up with a new antenna, and a new back panel if possible. Well, I guess it was a no-brainer. I found a working antenna, and mounted the hole with a steel washer. Not the prettiest fix, but it works. |
All times are GMT +1. The time now is 03:45 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com