|
Kenwood R5000 port setting
I have the R5000 and it is setup to connect to the computer. I did have
it hooked up to a much older computer and it worked just fine. I have unfortunately forgotten the port settings to make the radio work. If anyone can help I'd appreciate it. I am using Smart Kenwood Control 32 Thanks |
"Bob" wrote in message news:3NQld.506880$mD.13066@attbi_s02... I have the R5000 and it is setup to connect to the computer. I did have it hooked up to a much older computer and it worked just fine. I have unfortunately forgotten the port settings to make the radio work. If anyone can help I'd appreciate it. I am using Smart Kenwood Control 32 Thanks Start the program. Go to tools and then options. A window for the port setting will pop up. I use com1. If that dosn't work try the other ports. -- 73 and good DXing. Brian ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A lot of radios and 100' of rusty wire! Zumbrota, Southern MN Brian's Radio Universe http://webpages.charter.net/brianhill/ EMAIL- (Hide the $100 to reply!) |
Thanks for the response. Yes it is on COM 1 but I forgot the other port
settings. Within the program you click TOOLS, OPTIONS, PORT SETUP. There are 5 adjustable settings in there. I remember I used to have to change a couple of them for it to work but I forget which ones AND what settings to choose. Thanks again. Brian Hill wrote: "Bob" wrote in message news:3NQld.506880$mD.13066@attbi_s02... I have the R5000 and it is setup to connect to the computer. I did have it hooked up to a much older computer and it worked just fine. I have unfortunately forgotten the port settings to make the radio work. If anyone can help I'd appreciate it. I am using Smart Kenwood Control 32 Thanks Start the program. Go to tools and then options. A window for the port setting will pop up. I use com1. If that dosn't work try the other ports. |
"Bob" wrote in message news:dPRld.611567$8_6.552156@attbi_s04... Thanks for the response. Yes it is on COM 1 but I forgot the other port settings. Within the program you click TOOLS, OPTIONS, PORT SETUP. There are 5 adjustable settings in there. I remember I used to have to change a couple of them for it to work but I forget which ones AND what settings to choose. Thanks again. Ok. Let me give you mine. Maybe you can duplicate it and it will work? Bit per sec. -4800 Data bits-8 Parity-None Stop bits-1 Flow control-None -- 73 and good DXing. Brian ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A lot of radios and 100' of rusty wire! Zumbrota, Southern MN Brian's Radio Universe http://webpages.charter.net/brianhill/ EMAIL- (Hide the $100 to reply!) |
Well with your help I'm back in action. My 5000 has the dreaded keypad
bounce so using the computer is great. My new computer doesn't have a serial port, I had to buy a usb serial adapter. Along with your settings I had to uninstall the serial drivers and reinstall them again and all is fine. I haven't used the radio in quite a while so I was a little rusty. Thanks again Brian Hill wrote: "Bob" wrote in message news:dPRld.611567$8_6.552156@attbi_s04... Thanks for the response. Yes it is on COM 1 but I forgot the other port settings. Within the program you click TOOLS, OPTIONS, PORT SETUP. There are 5 adjustable settings in there. I remember I used to have to change a couple of them for it to work but I forget which ones AND what settings to choose. Thanks again. Ok. Let me give you mine. Maybe you can duplicate it and it will work? Bit per sec. -4800 Data bits-8 Parity-None Stop bits-1 Flow control-None -- 73 and good DXing. Brian ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A lot of radios and 100' of rusty wire! Zumbrota, Southern MN Brian's Radio Universe http://webpages.charter.net/brianhill/ EMAIL- (Hide the $100 to reply!) |
"Bob" wrote in message news:OcZld.407837$D%.131874@attbi_s51... Well with your help I'm back in action. My 5000 has the dreaded keypad bounce so using the computer is great. My new computer doesn't have a serial port, I had to buy a usb serial adapter. Along with your settings I had to uninstall the serial drivers and reinstall them again and all is fine. I haven't used the radio in quite a while so I was a little rusty. Thanks again Brian Hill wrote: "Bob" wrote in message news:dPRld.611567$8_6.552156@attbi_s04... Thanks for the response. Yes it is on COM 1 but I forgot the other port settings. Within the program you click TOOLS, OPTIONS, PORT SETUP. There are 5 adjustable settings in there. I remember I used to have to change a couple of them for it to work but I forget which ones AND what settings to choose. Thanks again. Ok. Let me give you mine. Maybe you can duplicate it and it will work? Bit per sec. -4800 Data bits-8 Parity-None Stop bits-1 Flow control-None -- 73 and good DXing. Brian ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A lot of radios and 100' of rusty wire! Zumbrota, Southern MN Brian's Radio Universe http://webpages.charter.net/brianhill/ EMAIL- (Hide the $100 to reply!) Why not buy a remote control for it so you can avoid 5the bounce issue? They are $99 |
"Bob" wrote in message news:OcZld.407837$D%.131874@attbi_s51... Well with your help I'm back in action. My 5000 has the dreaded keypad bounce so using the computer is great. My new computer doesn't have a serial port, I had to buy a usb serial adapter. Along with your settings I had to uninstall the serial drivers and reinstall them again and all is fine. I haven't used the radio in quite a while so I was a little rusty. Thanks again No problem Bob. Glad to help. -- 73 and good DXing. Brian ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A lot of radios and 100' of rusty wire! Zumbrota, Southern MN Brian's Radio Universe http://webpages.charter.net/brianhill/ EMAIL- (Hide the $100 to reply!) |
| All times are GMT +1. The time now is 03:01 AM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com