TEN-TEC RX-400.
 

Due in May 2005. 2MHz----3GHz. 50 bandwidths with 1.5:1 (6 /60 dB)
shape factor.PC control only. Under(!) 6K$.

Arthur Pozner wrote:
Due in May 2005. 2MHz----3GHz. 50 bandwidths with 1.5:1 (6 /60 dB)
shape factor.PC control only. Under(!) 6K$.

If Ten-Tec holds true to form, they will not support the software for the
radio for more than 1 year - then you are forgotten. The RX-350 firmware
has not been updated in well over 2 years. Ten-Tec doesn't even answer
e-mail enquiries on the subject.

--
Brian Denley
http://home.comcast.net/~b.denley/index.html

r wrote:
you haven't updated you webpage since February 22nd 2004
On Sat, 29 Jan 2005 12:43:55 -0500, "Brian Denley"
wrote:

Arthur Pozner wrote:
Due in May 2005. 2MHz----3GHz. 50 bandwidths with 1.5:1 (6 /60 dB)
shape factor.PC control only. Under(!) 6K$.

If Ten-Tec holds true to form, they will not support the software
for the radio for more than 1 year - then you are forgotten. The
RX-350 firmware has not been updated in well over 2 years. Ten-Tec
doesn't even answer e-mail enquiries on the subject.

r:
What would you like to see?

--
Brian Denley
http://home.comcast.net/~b.denley/index.html

On Sat, 29 Jan 2005 12:43:55 -0500, "Brian Denley"
wrote:

Arthur Pozner wrote:
Due in May 2005. 2MHz----3GHz. 50 bandwidths with 1.5:1 (6 /60 dB)
shape factor.PC control only. Under(!) 6K$.

If Ten-Tec holds true to form, they will not support the software for the
radio for more than 1 year - then you are forgotten. The RX-350 firmware
has not been updated in well over 2 years. Ten-Tec doesn't even answer
e-mail enquiries on the subject.


I never go to your site because it's never updated. Please stop
posting your link on your sig.

Thx from the group. Ironic that you're bashing ICOM - don't you
think?

Brian Denley wrote:


you haven't updated you webpage since February 22nd 2004

What would you like to see?



RX-350 firmware?




mike

Radio E V E R H A R T wrote:
On Sat, 29 Jan 2005 12:43:55 -0500, "Brian Denley"
wrote:

Arthur Pozner wrote:
Due in May 2005. 2MHz----3GHz. 50 bandwidths with 1.5:1 (6 /60 dB)
shape factor.PC control only. Under(!) 6K$.

If Ten-Tec holds true to form, they will not support the software
for the radio for more than 1 year - then you are forgotten. The
RX-350 firmware has not been updated in well over 2 years. Ten-Tec
doesn't even answer e-mail enquiries on the subject.


I never go to your site because it's never updated. Please stop
posting your link on your sig.

Thx from the group. Ironic that you're bashing ICOM - don't you
think?

Who bashed Icom? Am I supposed to update my site for your pleasure? Do you
speak for the group?

--
Brian Denley
http://home.comcast.net/~b.denley/index.html

Ten-Tec SUCKS

I will not buy a receiver from them as a protest against their sucky
management !


"Brian Denley" wrote in message
...
Arthur Pozner wrote:
Due in May 2005. 2MHz----3GHz. 50 bandwidths with 1.5:1 (6 /60 dB)
shape factor.PC control only. Under(!) 6K$.

If Ten-Tec holds true to form, they will not support the software for the
radio for more than 1 year - then you are forgotten. The RX-350 firmware
has not been updated in well over 2 years. Ten-Tec doesn't even answer
e-mail enquiries on the subject.

--
Brian Denley
http://home.comcast.net/~b.denley/index.html

I think this will be supported if the main customer target is the
government. however consumer support will be questionable.

Ten-Tec is very government driven at this time. and they will bend over
backwards for them. they don't seem to care much for "regular people"
however. that is the problem with the 350, if the 350 was a Government
item, there would have been updates last year.

wrote:

I think this will be supported if the main customer target is the
government. however consumer support will be questionable.

Ten-Tec is very government driven at this time. and they will bend over
backwards for them. they don't seem to care much for "regular people"
however. that is the problem with the 350, if the 350 was a Government
item, there would have been updates last year.

Quite honestly, most folks knew years ago that TEN-TEC provided poor customer
support for radios that were supposedly 'upgradeable'.

Maybe one 'upgrade' and that was it.

Buy a good radio, buy Drake.

My own 2 cents.

dxAce
Michigan
USA

http://www.iserv.net/~n8kdv/dxpage.htm

wrote:

an SW-1 ???

And you wonder why some folks think you're a 'tard boy.

dxAce
Michigan
USA