Remember Me?
Menu
Home
Search
Today's Posts
Home
Search
Today's Posts
RadioBanter
»
rec.radio
»
Shortwave
>
Snake antennas
LinkBack
Thread Tools
Search this Thread
Display Modes
Prev
Next
#
11
August 14th 05, 10:19 PM
Telamon
Posts: n/a
In article . com,
wrote:
It's been hot as heck in NYC for the last couple of days. Yesterday, to
escape the heat, I spent much of the afternoon in Prospect Park,
where's there's usually a nice breeze and cooler temperatures. On a
whim I brought along 100 ft of wire and my HF-150. I laid the wire out
in a 'snake' configuration, right on the ground, and was pretty
impressed with the results. I was in a quiet spot there in the Park.
Even so, when people describe this as a low noise antenna, they aren't
kidding. Using a couple of tree limbs, I raised the wire up about 7-8
ft. The increase in noise was noticeable, and the s/n ratio was a
little worse.
I realize that the classic snake antenna uses coax, not wire. However,
ordinary old insulated wire sure seemed to work well for me yesterday.
I've read around on the web about these antennas and their low noise
characteristics, but I'd be interested to hear about any experiments
the readers of this group have done. I'm especially curious about how
the presence of metal objects in the immediate vicinity of a snake
antenna would affect its performance. For example, suppose you took
200ft of insulated wire and 'stiched' it through the bottow row of
'links' on a very long chain link fence. I can't imagine a stealthier
antenna than this, but would the fence muck things up?
If you want a low noise antenna use a loop type that is sensitive only
to the magnetic part of the EM wave. Small loops will need amplification.
--
Telamon
Ventura, California
Reply With Quote
Thread Tools
Search this Thread
Show Printable Version
Search this Thread
:
Advanced Search
Display Modes
Switch to Linear Mode
Switch to Hybrid Mode
Threaded Mode
Posting Rules
Smilies
are
On
[IMG]
code is
On
HTML code is
Off
Trackbacks
are
On
Pingbacks
are
On
Refbacks
are
On
Similar Threads
Thread
Thread Starter
Forum
Replies
Last Post
F/A New Motorola VHF portable antennas (Motorola Branded!!)
Andy
Swap
1
May 26th 04
09:22 PM
F/A New Motorola VHF portable antennas (Motorola Branded!!)
Andy
Swap
0
May 18th 04
10:14 PM
FA Motorola VHF rubber duck Antennas $4.99 ea. Dealer cost $8.70 List $11.80
Andy
Swap
0
May 17th 04
01:46 PM
Poor quality low + High TV channels? How much dB in Preamp?
lbbs
Antenna
16
December 13th 03
03:01 PM
Poor quality low + High TV channels? How much dB in Preamp?
lbbs
Shortwave
16
December 13th 03
03:01 PM
All times are GMT +1. The time now is
06:12 PM
.
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
Contact Us
RadioBanter forum home
Privacy Statement
Copyright © 2017
LinkBack
LinkBack URL
About LinkBacks