![]() |
|
Anntenna
I want to buy a new antenne, i think it's gonna be the ala-1530 or the
rf sysytems dx1promk2. Anybody here as experience with these one's? witch performce better? Henk |
See
http://www.dxing.info/equipment/dx1pro.dx The ALA 1530 is also a great antenna, but to match the performance of the DX-1 it would have to be mounted on a rotator. If you did that, it might also be better at suppressing urban RFI. -- John Plimmer, Montagu, Western Cape Province, South Africa South 33 d 47 m 32 s, East 20 d 07 m 32 s RX Icom IC-756 PRO III with MW mods Drake SW8 & ERGO software Sony 7600D GE SRIII BW XCR 30, Braun T1000, Sangean 818 & 803A. Hallicrafters SX-100, Eddystone 940 GE circa 50's radiogram Antenna's RF Systems DX 1 Pro, Datong AD-270 Kiwa MW Loop http://www.dxing.info/about/dxers/plimmer.dx "Henk" wrote in message ... I want to buy a new antenne, i think it's gonna be the ala-1530 or the rf sysytems dx1promk2. Anybody here as experience with these one's? witch performce better? Henk |
"Henk" wrote in message ... I want to buy a new antenne, i think it's gonna be the ala-1530 or the rf sysytems dx1promk2. Anybody here as experience with these one's? witch performce better? Henk The 1530 is a great antenna. Here's a review of the ala 330, which is basically the same antenna, with more gain through the shortwave bands: http://www.radiointel.com/review-wellbrook.htm A review of the ala 1530: http://www.astrosurf.org/lombry/qsl-ala1530.htm -Brian |
John Plimmer wrote:
See http://www.dxing.info/equipment/dx1pro.dx The ALA 1530 is also a great antenna, but to match the performance of the DX-1 it would have to be mounted on a rotator. If you did that, it might also be better at suppressing urban RFI. Ok, thanks for the reply, i shall visit the mentioned site and do some reading. Henk |
Brian wrote:
"Henk" wrote in message ... I want to buy a new antenne, i think it's gonna be the ala-1530 or the rf sysytems dx1promk2. Anybody here as experience with these one's? witch performce better? Henk The 1530 is a great antenna. Here's a review of the ala 330, which is basically the same antenna, with more gain through the shortwave bands: http://www.radiointel.com/review-wellbrook.htm A review of the ala 1530: http://www.astrosurf.org/lombry/qsl-ala1530.htm -Brian I understand that the 1530 must be used with a rotor,to get the best results, correct me if i'm wrong. I have not much room over here, so i'm curious how it performs under the roof? Henk |
Drifter wrote:
I understand that the 1530 must be used with a rotor,to get the best results, correct me if i'm wrong. I have not much room over here, so i'm curious how it performs under the roof? Henk. ************************************************** ************************* hi Henk... I use the 330, and once i'm free of this chemo, i'll be ordering the 1530. i got the 330s because i'm more into SW than MW/LW. i'm on top of a mountain in w.pa. 6 acres, lots of room for all kinds of ant. you can mount the loop a number of ways. read the reports from a number of web sites and you will see what i mean. on SW you can turn the loop for qrm or to cut out a boomer to find that low power station you have not heard before. check the loop groups on yahoo for some great info. and, RHF, will be along with some good info for you also. i love to play with all kinds of loops. i have 7 different types. great fun. and, Joe A. will be along with some great info for you. he has his 330s in his attic on a rotor. my 330s hung in my dining room, for about 6 months last winter, from a bungee cord to a large ceiling fan. worked great, and i could rotate it by turning the fan. right now it's off my rear deck, on a 10 ft. mask, i can turn by hand. these loops are first rate. you can email wellbrook with any questions you may have. after i get the second loop, both will be mounted in my attic like Joe's. like i said, these loops are first rate...Good DX... Drifter... *on the fringe of Pittsburgh* __________________________________________________ _____________________________ Posted Via Uncensored-News.Com - Accounts Starting At $6.95 - http://www.uncensored-news.com The Worlds Uncensored News Source That sounds good, i actually in the middle of a city(all buildings around me) so for wires is almost no room, i shall visit the yahoo group about the loops, my main listening is utility and sometimes aero. Thanks for the information, i shall keep it in mind. Henk. |
I did a www.devilfinder.com search for,Build your own radio
antenna rotators.You might want to check that out. cuhulin |
|
In article , Drifter
wrote: I understand that the 1530 must be used with a rotor,to get the best results, correct me if i'm wrong. I have not much room over here, so i'm curious how it performs under the roof? It has more to do with the incoming signal to the antenna. The lower frequencies look more like a signal point source so then the antenna pattern has an appreciable effect on the received signal strength. Certainly you will see the loop null on a AMBCB daytime signal and chances are you will also at night depending on where the signal is coming from because at that time you could have either or both sky wave and ground wave. The smaller the loop size relative to the received wavelength the better defined the directional pattern. For SW the higher the frequency the more the signal energy is scattered by the ionosphere so again the antenna pattern is effectively less defined. Some people report small loop directional characteristics are evident up to around 5 MHz. I have had a small loop of 20 foot circumference showing a null at 5 MHz myself. I expect that a smaller 1 meter loop might show a null up to 10 MHz but a null in the pattern is a lot less likely higher in frequency than that. Well, I keep talking about nulls because the loop pattern response is very broad and you are only likely to notice the null in the pattern. -- Telamon Ventura, California |
My experience would seem to bear you out, Telemon. I have a 330S and
originally had it on a rotor. However, because the antenna's directional characteristics disappear at around 4 mhz or so, and I don't do a lot of listening 'down there', I opted for a simpler setup without a rotor. It'd be different if I had a 1530 though. I think I'd insist on a rotor then, since the 1530 operates best on the lower frequencies. Steve |
All times are GMT +1. The time now is 03:28 PM. |
|
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com