On Sun, 09 Apr 2006 14:02:40 GMT, "finalquest"
wrote:

Greetings all !
I'm looking to put up another longwire after the past years' devastation of
my previous antennae. I've been reading about baluns and matching and am
wondering if they're really needed. Previously I just used the longwire
connected to 50 ohm cable with a ground on the shield. Will a balun make a
difference and is a 1:1 appropriate. Any help is appreciated. Thanks !


There's a huge mismatch except on the frequencies where your wire is
resonant. Those probably total 2 or 3 in the entire HF band.
Otherwise the mismatch will eat most of the signal. Plus, your wire
will be feeding all manner of static electricity into your receiver.

http://www.geocities.com/qrp_baluns/lm.html

David wrote:
On Sun, 09 Apr 2006 14:02:40 GMT, "finalquest"
wrote:

Greetings all !
I'm looking to put up another longwire after the past years' devastation of
my previous antennae. I've been reading about baluns and matching and am
wondering if they're really needed. Previously I just used the longwire
connected to 50 ohm cable with a ground on the shield. Will a balun make a
difference and is a 1:1 appropriate. Any help is appreciated. Thanks !


There's a huge mismatch except on the frequencies where your wire is
resonant. Those probably total 2 or 3 in the entire HF band.
Otherwise the mismatch will eat most of the signal. Plus, your wire
will be feeding all manner of static electricity into your receiver.

http://www.geocities.com/qrp_baluns/lm.html

I recently purchased one of these and feel that it helped me quite a
bit, quality product, nicely packaged, made is USA, reasonable price!

Order one today, nope I am not associated with them, just a happy customer!