RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Shortwave (https://www.radiobanter.com/shortwave/)
-   -   SANGEAN 808 (or DX-380) shows readout letter E (https://www.radiobanter.com/shortwave/94389-sangean-808-dx-380-shows-readout-letter-e.html)

[email protected] May 13th 06 05:03 AM

SANGEAN 808 (or DX-380) shows readout letter E
 
When I turn on power (batts are good) & I get a flashing letter E
displayed on right side of face

noithing in my manual mentions anything about this situation

Anybody have an answer (or) opinion ????????????


Jim Shaffer May 13th 06 06:16 PM

SANGEAN 808 (or DX-380) shows readout letter E
 
On 12 May 2006 21:03:44 -0700, wrote:

When I turn on power (batts are good) & I get a flashing letter E
displayed on right side of face

noithing in my manual mentions anything about this situation

Anybody have an answer (or) opinion ????????????


I don't know where my manual is, but I'm pretty sure it says that the
flashing E means that the AA batteries are bad. (It's been so long
since I've used that radio that I don't even remember where the AA
batteries go in it.)



[email protected] May 13th 06 07:20 PM

SANGEAN 808 (or DX-380) shows readout letter E
 
THKS for relp - I rechecked voltage on batts - stiil got letter E
I then hooked up RADIO to a 6V Lantern batt & THEN WAS OK - so I
rechecked the AA batts while UNDER LOAD & BINGO - (1) of the AA batts
would read only .75 V when under load ...
SO THAT WAS IT - (1) WEAK 'AA" batt "under load"
THKS AGAIN FOR YOUR REPLY ..........
I went back over my manual - I still can't find any mention of the
letter 'E' readout - maybe a revised manual is out with that info ?



All times are GMT +1. The time now is 12:25 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com