Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
On 10 Jun 2006 00:57:05 -0700, "RHF"
wrote: Telamon, The Plug / Jack is 3/16" Stereo - With the Loop Antenna wired to the End-Tip and Center-Ring. Note the Barrel of the Plug /Jack is not used. ~ RHF 3/16''? http://www.switchcraft.com/products/jack-search.html |
#2
![]() |
|||
|
|||
![]()
David - Sorry the 3/32" {Sub-Miniature} Stereo-Jack ~ RHF
The External AM/FM Antenna feed-in-line requires a 3/32" Stereo Plug to connect to the Cambridge SoundWorks # 740 Radio * RadioRadioShack Catalog # 274-244 http://www.radioshack.com/product/in...ductId=2062449 The Plug / Jack is 3/32" Stereo - With the Loop Antenna wired to the End-Tip and Center-Ring. Note the Barrel of the Plug /Jack is not used. David - TYVM for the Link : http://www.switchcraft.com/products/jack-search.html ABOUT - Modern : Jacks and Plugs http://en.wikipedia.org/wiki/Jack_plug The 3.5 mm or "Miniature" and 2.5 mm or "Sub-Miniature" Size Jacks and Plugs were originally designed as Two-Conductor connectors for Earpieces {Headphones} on Transistor Radios. The 3.5 mm and 2.5 mm Size Jacks and Plugs are also referred to as 1/8" and 3/32" respectively in the United States, * 3.5 mm ~ 1/8" * 2.5 mm ~ 3/32" |
#3
![]() |
|||
|
|||
![]()
On 10 Jun 2006 13:24:14 -0700, "RHF"
wrote: The 3.5 mm and 2.5 mm Size Jacks and Plugs are also referred to as 1/8" and 3/32" respectively in the United States, Obviously not. |
#4
![]() |
|||
|
|||
![]()
David - "Obviously" ~ RHF
Obviously you have caught me : Thinking Old English System in a Modern Metric World ! ![]() * English Sytem of Measurements = Inches to Feet to Yards to Miles http://en.wikipedia.org/wiki/English_system * Metric System of Mesurements = Millimeters to Centi-Meters to Meters to Kilo-Meters http://en.wikipedia.org/wiki/Metric_system * Modern International System of Units (SI) { Standardized Metric System of Measurement } http://en.wikipedia.org/wiki/SI WHY "SI" - French - Systčme International d'Unités . . .. . David wrote: On 10 Jun 2006 13:24:14 -0700, "RHF" wrote: The 3.5 mm and 2.5 mm Size Jacks and Plugs are also referred to as 1/8" and 3/32" respectively in the United States, Obviously not. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|