Home |
Search |
Today's Posts |
#14
![]() |
|||
|
|||
![]()
Well, it works.
I have been playing with the ELPAF since last autumn; first on my R-390A, which, despite having done the AF Deck mod, does have its quirks with regard to audio quality. The ELPAF cleaned up audio admirably. Mostly doing MW DX then. Then, this summer together with a modified IC-703 mostly on SW. It practically eliminates the distortion caused by fades, as well as high-frequency hiss and noise giving an audibly better signal to noise ratio. The trade-off is of course a more limited audio response. Personally I can live with that - I never use bandwidths wider than 6-7 kHz anyway. My ELPAF has a bypass switch so it is easy to compare audio quality. I used to have an SE-3 as well, and enjoyed the excellent audio it produced. The ELPAF does little less with regard to audio recovery. I am thinking about doing an A-B comparison between the two later on. BM |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Interesting Article | Shortwave | |||
low distortion antenna amp | Homebrew | |||
Antenna vs Ground - interesting article FWIW | Antenna | |||
Reflection Delay is it real??? | Antenna | |||
LQQKing for Construction Article | Antenna |