| Home |
| Search |
| Today's Posts |
|
#1
November 9th 19, 06:08 PM
posted to rec.radio.amateur.moderated,rec.radio.amateur.homebrew
|
|||
|
|||
[QRZ] Xtal oscillator issue
Homebrew and Kit Projects /////////////////////////////////////////// Xtal oscillator issue Posted: 09 Nov 2019 10:04 AM PST https://forums.qrz.com/index.php?thr...-issue.680007/ |
|
#2
November 10th 19, 10:27 PM
posted to rec.radio.amateur.homebrew
|
|||
|
|||
|
[QRZ] Xtal oscillator issue
On Saturday, November 9, 2019 at 12:08:45 PM UTC-6, QRZ.com via rec.radio.amateur.moderated Admin wrote:
Homebrew and Kit Projects /////////////////////////////////////////// Xtal oscillator issue Posted: 09 Nov 2019 10:04 AM PST https://forums.qrz.com/index.php?thr...-issue.680007/ Hi, Conventional wisdom says that an inductor in series with an xtal will pull it low, while a cap pulls it high. That said, I have found pulling them low is more challenging than high. Putting 2 (or more) xtals in parallel is sometimes tried to increase the pull range. Much depends on the circuit values that are used. Can you post the circuit you are using? Also, do a search on super CXOs for more info. Bob WB0POQ |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Xtal oscillator. | Homebrew | |||
| TS 520 Xtal | Swap | |||
| XTAL oscillator with a XOR gate | Homebrew | |||
| XTAL oscillator with a XOR gate | Homebrew | |||
| 100 Khz Xtal, Anyone need one? | Boatanchors | |||
Linear Mode
