Need Yaesu FT-50 programming help...
 

Well.. my radio has somehow had a fit. It seems it works fine, but won't
program with ADMS1D [ver 1.06].
The radio was modded for MARS/CAP, and has worked with the same software for
years.
Something happened on this last go-round... the write failed and wouldn't
complete, giving an immediate time-out error.
So I reinstalled the software, made a new template, reset the radio, etc,
and it does one thing only...
It will write only up to 60% and then gives a timeout error, no matter what
template or data file used.
Any ideas?
thanks and please reply to my email.
rb

Need Yaesu FT-50 programming help...
 

Woody wrote:

Well.. my radio has somehow had a fit. It seems it works fine, but won't
program with ADMS1D [ver 1.06].
The radio was modded for MARS/CAP, and has worked with the same software for
years.
Something happened on this last go-round... the write failed and wouldn't
complete, giving an immediate time-out error.
So I reinstalled the software, made a new template, reset the radio, etc,
and it does one thing only...
It will write only up to 60% and then gives a timeout error, no matter what
template or data file used.
Any ideas?
thanks and please reply to my email.
rb




Hi, the ADMS software SUCKS for the FT-50!!! They should be ashamed of themselves.

The same thing happened to me years ago. See if you can fine a program
called "EVE / YARD"
It is 2 programs usually found together. I used this on my FT-50 and
worked great!!! It did more than
the ADMS and did NOT need the damn template!!!!!!!!!!!!!!!
73

Need Yaesu FT-50 programming help...
 

Real hams DON'T need software/computers to program radios! Especially HT's.


"Woody" wrote in message
news:F7zXg.4218$e65.975@trnddc05...
Well.. my radio has somehow had a fit. It seems it works fine, but won't
program with ADMS1D [ver 1.06].
The radio was modded for MARS/CAP, and has worked with the same software
for years.
Something happened on this last go-round... the write failed and wouldn't
complete, giving an immediate time-out error.
So I reinstalled the software, made a new template, reset the radio, etc,
and it does one thing only...
It will write only up to 60% and then gives a timeout error, no matter
what template or data file used.
Any ideas?
thanks and please reply to my email.
rb

Need Yaesu FT-50 programming help...
 

I had a similar problem a few years ago. I don't remember if it was a
Win 98 or Win 2K problem. Do a google search, there is a parameter that
has to be changed in windows and then the software worked fine.

JJ wrote:
Woody wrote:

Well.. my radio has somehow had a fit. It seems it works fine, but
won't program with ADMS1D [ver 1.06].
The radio was modded for MARS/CAP, and has worked with the same
software for years.
Something happened on this last go-round... the write failed and
wouldn't complete, giving an immediate time-out error.
So I reinstalled the software, made a new template, reset the radio,
etc, and it does one thing only...
It will write only up to 60% and then gives a timeout error, no matter
what template or data file used.
Any ideas?
thanks and please reply to my email.
rb




Hi, the ADMS software SUCKS for the FT-50!!! They should be ashamed of
themselves.

The same thing happened to me years ago. See if you can fine a program
called "EVE / YARD"
It is 2 programs usually found together. I used this on my FT-50 and
worked great!!! It did more than
the ADMS and did NOT need the damn template!!!!!!!!!!!!!!!
73

Need Yaesu FT-50 programming help...
 

LOL...real ham....

Sorry dude, you're trolling up the wrong tree..... I'm just a simple RF
enthusiast and have no desire to "be" a "ham".
The FT is a valued test piece I use for many things; ham being quite low on
the list.

With this new ammo however; you might try an FCC type acceptance troll. I'd
say that'll give you a better shot at getting a long thread.

At any rate, a simple checksum correction on the offending rdf has solved
the corruption problem.

Thanks to those
real techs offering real help.
rb
-----------

www.hamsexy.com .... an artistic display of "real hams" from across the
world.


============
"A.E. 352" wrote in message
...
Real hams DON'T need software/computers to program radios! Especially
HT's.


"Woody" wrote in message
news:F7zXg.4218$e65.975@trnddc05...
Well.. my radio has somehow had a fit. It seems it works fine, but won't
program with ADMS1D [ver 1.06].
The radio was modded for MARS/CAP, and has worked with the same software
for years.
Something happened on this last go-round... the write failed and wouldn't
complete, giving an immediate time-out error.
So I reinstalled the software, made a new template, reset the radio, etc,
and it does one thing only...
It will write only up to 60% and then gives a timeout error, no matter
what template or data file used.
Any ideas?
thanks and please reply to my email.
rb