WTT: Kenwood TS-940SAT w/SM-220 for FT-847
 

I have a Kenwood TS-940 ST in good condition that I would like to swap for a
radio capable of working satellites on 2m/430. The 940 is used regiularly
and is excellent operating condition. It has a few scratches and scrapes
here and there, but none on the front panel. Also included is a Kenwood
SM-220 station scope. It does not have the BS-8 panadaptor option. I'll
also throw in a Kenwood MC-60 amplified desk microphone. It has the
original manual, which has been laminated and re-bound. The SM-220 manual
is a copy.

I'm interested in a Yaesu FT-847, but would consider an Icom 275H/475H pair,
a Kenwood TS-790 w/1.2 GHz, or an FT-736 w/1.2 GHz.

You can reach me by email at .

Thanks and 73,
Jeff
N0WJP

The manual is for the TS-940, not the microphone. If you would like to hear
this radio on the air, I'm on the 1721 group just about every night between
9:30 and 11:00 PM central time. The frequency is 7.280.5 until about
10:00PM, then we switch to about 7.260.5.

Thanks and 73,
Jeff
N0WJP



"Jeff Camp" wrote in message
...
I have a Kenwood TS-940 ST in good condition that I would like to swap for
a
radio capable of working satellites on 2m/430. The 940 is used regiularly
and is excellent operating condition. It has a few scratches and scrapes
here and there, but none on the front panel. Also included is a Kenwood
SM-220 station scope. It does not have the BS-8 panadaptor option. I'll
also throw in a Kenwood MC-60 amplified desk microphone. It has the
original manual, which has been laminated and re-bound. The SM-220 manual
is a copy.

I'm interested in a Yaesu FT-847, but would consider an Icom 275H/475H
pair,
a Kenwood TS-790 w/1.2 GHz, or an FT-736 w/1.2 GHz.

You can reach me by email at .

Thanks and 73,
Jeff
N0WJP